2 CHARLES EAMES FOR HERMAN MILLER LTR STOOLS

2 CHARLES EAMES FOR HERMAN MILLER LTR STOOLS: Mid-century modern, circa 1950, pair of Charles Eames for Herman Miller LTR occasional tables or stools with wire bases. Both with labels at the underside

2 CHARLES EAMES FOR HERMAN MILLER LTR STOOLS: Mid-century modern, circa 1950, pair of Charles Eames for Herman Miller LTR occasional tables or stools with wire bases. Both with labels at the underside

Two (2) Charles Eames for Herman Miller LTR occasional tables or stools with wire bases. Need restoration. Both have label, see pictures. Measure 13.25 in. x 15.75 x 10 in. tall each. Weigh 10 lbs as

Black laminate over plywood, chrome wire bases, with labels. 15.5 W X 13" D X 10" H. Tops as is."

Charles and Ray Eames for Herman Miller 'LTR' Side Table, Zeeland, Michigan, c. 1950, plywood, steel, unmarked, ht. 10, wd. 15 1/2, dp. 13 1/4 in. For further information on this lot please visit Bonh

Charles & Ray Eames LTR low side table, Herman Miller Designed 1950, produced circa 1970-1984 Zinc-plated rods, white laminate, birch 10" x 15 1/2" x 13 1/4"   Herma

Pair of LTR side tables, Zeeland, MI, 1960s; Zinc-plated steel, walnut, laminate; Unmarked; 10" x 15 1/2" x 13"

Together with a modern maple stool, a chrome and white mesh stool, and a white-lacquer and chrome table. 4 pieces From: 10"h x 13-1/2"w x 15-1/2"d to 29"h x 24-1/2"d

Together with a modern maple stool, a chrome and white mesh stool, and a white-lacquer and chrome table. 4 pieces From: 10"h x 13-1/2"w x 15-1/2"d to 29"h x 24-1/2"d

Charles and Ray Eames (American, 1907-1978 | American, 1912- 1988)  LTR table, by Herman Miller white laminated solid birch top over a zinc base unmarked H 10 x W 15 1/2 x D 13 1/4 inches. Proper

Description - Set of three Charles Eames Herman Miller LTR tables. Dimensions - 10" x 15.5" x 13"

(lot of 4) Herman Miller LTR tables, design by Charles Eames for Herman Miller, all with white laminate tops rising on rod or wire supports, two with misapplied Herman Miller tags reading "design by G

CHARLES EAMES for HERMAN MILLER "LTR" Table. White Laminate Top on Chromed Steel Frame Base. Metal label.-- Dimensions: H: 10 inches: W: 13.25 inches: D: 15.5 inches ---

CHARLES EAMES for HERMAN MILLER "LTR" Table. White Laminate Top on Chromed Steel Frame Base. Metal label.-- Dimensions: H: 10 inches: W: 15.5 inches ---

CHARLES EAMES for HERMAN MILLER LTR Table. Black laminate top on silver metal legs. Contemporary Herman Miller label.-- Dimensions: H: 10 inches: W: 15.5 inches: D: 13.25 inches ---

Introduced in 1957 Charles Eames tall Draftsman's armchair stool. Ivory colored shell with upholstery in an olive, mustard shade vinyl. Height (adjustable) 38", width 25", depth 23". Marked on undersi

(2) Genuine Charles Eames Herman Miller Aluminum Group Lounge chairs dating from 1960-1978, with Herman Miller stamp to base. Aluminum and steel with coated arms and black leather cushions. Dimensions

Description - Charles Eames Herman Miller early LTR tables. Dimensions - 10" x 15.5" x 13"

Charles Eames & Ray Eames for Herman Miller 'Time Life Stool'. Walnut. Circa 1960's, Unmarked. 14 7/8" H x 11" W (smaller side) x 13" W (larger side). Condition report: good condition with wear commis

(lot of 2) A Charles and Ray Eames for Herman Miller fiberglass stacking side chair (DSS) fiberglass chair, repainted in orange, marked Herman Miller on underside, together with a fiberglass side chai

Counter height pair of stools, white molded fiberglass seats on H bases with stretchers, marked and with paperwork, dated 2019. 40"h x 18"w x 22"d, seat height 26"

A vintage LKX-2 by Charles and Ray Eames for Herman Miller. 27 x 20 x 23. All measurements are in inches. (Height x Width x Depth).

Charles Eames for Herman Miller chairs, 1 fiberglass and 1 plastic. Dimensions -

Charles and Ray Eames LTR Herman MillerUSA, 1950rosewood plywood, zinc-plated steel15.5 w × 13.25 d × 10 h in (39 × 34 × 25 cm) Signed with partial decal manufacture