CHINESE TANG STYLE HORSE AND RIDER.

Chinese Tang style horse & rider lamp, 19th/20th c., earthenware horse and rider, on carved wood stand, mounted on metal base, figure not drilled, 22"h x 6.5"w x 4"d (total)

Condition: some loss to glazing throughout 22 inches wide; 27 inches high

Two pottery figures of men on horses. Both in good condition with worn surface paint. No apparent major cracks, chips, repairs, etc. (1) Figure on white horse, 12 1/4" H x 9" x 4" approx. (2) Figure o

Chinese Tang Style Pottery Horse & Rider

on fitted wooden stands, Imperial yellow and green. 10 3/4" high, 8" wide, 3 1/2" deep. Paint losses, small chips at base, crazing. Purchased Hong Kong, 1969.

Terracotta horse and rider with sancai 'egg and spinach' glaze, rider's head and horse's feet and base left bisque. Approx. 14 1/2" L x 5" W x 15 1/2" H.Provenance: the estate of John Long, highly reg

19th century or earlier. The horseman atop a brilliantly glazed Tang Horse in full gallop. The front and back leg of the left side of the horse are separated at the joints but original and a piece of

Chinese Tang Dynasty style horse and rider pottery figural sculpture with Sancai-type decoration, mounted to rectangular base, impressed "Hong Kong" mark underside. 18" H x 4.75" W x 16" D. Crazing, r

Pair of antique Chinese Tang style horses and warrior riders figurines. Wooden sculptures modeled on rectangular bases with gilt lacquer over red. Property of Mark Tremonti, American musician, foundin

Chinese Tang Style Glazed Pottery Horse w/ Rider. Height: 19.75 in. Width: 15 in

Two Chinese pottery Tang style horses, one with rider. The horse with rider measures 13.5" high, 11" wide, 4.5" deep. The horse with elaborate saddle and without a rider measures 12" high, 11" wide, 6

A Old Chinese Tang Style Tri-Colour Pottery (Sancai) Horse Rider ｜ 老三彩唐式黃驄驃騎士像 Dimension: 69x55x23cm No refund, retu

Tang-Style Sancai Glazed Horse & RiderChinese Tang-style sancai glazed pottery equestrian group; of a female rider with falcon perched on covered left hand, sitting atop a four-square horse on a plint

CHINESE TANG STYLE SANCAI GLAZE POTTERY HORSE AND RIDER. HEIGHT 17 1/4"

Chinese Tang Style Ceramic Rider and Horse. Provenance: Private Sarasota collection. Height: 12 in.

Chinese tang dynasty style san cai pottery horse and rider figure. Measures 14 1/2" height by 13" width.

Ceramic sculpture on wood base of a Chinese-style horse and rider, signed "CB/Paris" on ceramic base. [Overall: 8 1/2" H x 7 1/2" W x 3 1/4" D].

A lot of three Chinese terracotta figurines to include a female funerary attendant, a duck, and a rider on a horse. Horse and rider: 11in tall.

Large Chinese antique polychrome carved tang dynasty style rider on horse. Measures 27"(67cm) height by 23" (58cm) length.

Three Tang-Style Pottery HorsesThree Chinese Tang-style pottery horses; each standing four-square: one straw-glazed, one with a rider and one with dressings; H: 19 3/4" (tallest)

(20th Century, or possibly earlier). An antique Chinese Tang Dynasty-style terracotta pottery tomb figure. An equine sculpture of a rider wearing robes, seated on a horse. Hand painted in multiple col

3 Chinese Tang sancai style pottery pieces; 2 camels (14.25"H, 9.5"H) and a horse with rider (14"H)

Glazed pottery grouping. Rider on Horse. Wood stand; 18.5in.H. x 13in.W.

Tang style, molded pottery horse and rider figure, remnants of white and green pigment, on fitted wood stand, 10-1/4 x 7-1/2 x 3-1/2 in. Provenance: Private Collection, Cincinnati, Ohio