Gear-Cutting Processes

A Watchmakers Brass and Steel Mandrel Lathe and Gear Cutting Machine, 19th Century, Each unsigned. Mandrel Lathe: H: 6 1/2 x W: 18 x D: 7 in. Gear Cutter: H: 9 1/2 x W: 12 1/2 x D: 7 1/2 in. From the

19th C Watchmakers Gear Cutting Machine Tool - brass and iron, 9 1/2" H x 10 1/2" W, weighs 9#. Untested, good clean, rust-free / corrosion-free condition.

3 Brass Clockmaker's Rounding-up Tools. 3 brass and steel clock or watchmaker's gear cutting rounding up tools, 6 in., 6.25 in. and 6.5 in. dia. hand wheels with turned wood handles, mounted on wood b

43 DREAMS uses no ink. Images are rendered via a high-tech laser-cutting process in which artworks (by Simon Periton Rachel Whiteread and Nick Knight among others) are literally burned into paper. Sli

Green and blue with floral design oil lamp. Includes base, shade, chimney, and burner. Minimal chipping on shade, likely from cutting process. Measures approx. 9 1/2" tall, 5" diameter.

Each hand blown and cut example with faceted and panel stem connecting a circular foot with notched edge differs from another in subtle ways due to the hand blown, cutting and polishing process of the

Vase, Cut Glass, 6.25" x 3.75", Modern Example Piece Showing Process Of Cutting From Blank To Rough Cut To Polished Cut And More, Estate Of Jean & Ralph Borelli.

Lot of 7 Factory Die Pieces. Used for cutting in the industrial process. Made of metal with one side sharp as a knife.One of dies is shaped like mittens. One is labeled, Viking-tex by ODC, Port Huron,

North Africa, Morocco, Sahara Desert, Paleolithic, ca. 143000 to 18000 BCE (145000 to 20000 BP). A pair of chert implements both shaped by the knapping process to use as cutting or scraping tools. The

This cutting-edge instrument is the result of Peavey's continual dedication to the working musician. The Milestone bass is a rare combination of stunning craftsmanship and intelligent design with a re

Chandler's Ice Cutting Machine, 7"x8"x14"H without handle -gears move freely

c.1490 A.D. A group of two stained glass rectangular panels with scenes from the Annunciation; one with kneeling nimbate angel and scroll with legend 'Ave [Maria] Gra[tia] plena D[omi]n[u]s'; kneeling

c.11th century A.D. A silver zoomorphic statuette of a 'Great Beast' modelled in the round, standing with a beak-like face, horns, hooves and a fat tail, applied ropework spirals around the eyes and t

Offering more knobs and switches than you can shake a stick at, the MCI Guitorgan was invented by Bob Murrell and was intended mimic an organ. This is a rare and cool piece.When it comes to unique gui

1940s National Guitar AmpThis a very cool piece of history. A national amp from the 40s. We cannot find a model or any great specifics. it works well and sounds very cool. the handle is broken but tha

This is an early model (#74) of the Studio Platinum Les Paul. I can't find a lot of info out there on them, I think with the production period being so limited on them they are fairly uncommon. This o

Thanks for viewing this item! Here is a 98 Epiphone Flying V. To say this guitar is stellar is an understatement. There are a few blemishes to the finish on the body (pictured), but that shouldn't det

Peavey Mystic 1980sFrom the 1983 Peavey Horizon/Mystic/Razer (TM) operating guide: PEAVEY manufactured the MYSTIC between 1983 and 1986. The neck is made from hard rock maple using Peavey's patented b

Circa 1940 Gibson Model K.E.H. Power Amplifier (Serial #12087)This is an extremely rare find as it appears to be all original except for the new speaker. Both tubes light up and it works, speaker and

This is a greta vintage piece that has some patina. It is functioning though. There are cracks in the finish and some dings and scratches.In 1958, Swedish-based Hagstrom started manufacturing electric

1963-64 Silvertone 1448 with Amp in Case - Black SparkleDanelectro manufactured Silvertone-branded guitars between, roughly, 1962 and 1968 for the American Sears, Roebuck & Co. department stores and m

The KM 184 is the perfect instrument mic. The nickel KM 184 Microphone from Neumann is a small-diaphragm cardioid condenser microphone that offers premium Neumann sound that's both open and musical. I

Kent Model 534 Basin Street Model Solid Body Electric Bass Guitar, made by Teisco (1965), made in Japan, sunburst lacquer finish, nato mahogany body and neck, rosewood fingerboard. The Kent Model 534

Manufactured, in the early 1970’s by Kustom Electronics Inc., these vintage 150-PA Twin, Speaker Towers have that great CCR sound. All original with the head to go with it. These sound as good as th