Morse #15 Pump

This is a very nice original Morse Diving Equipment Model 15 air pump. This is the same put that would accompany the Model 15 shallow water diving helmet. The original two piece cast iron handle and b

WWII era Morse Diving Equipment model 15 shallow water diving pump, serial 6902 with USN inspection stamp. Measures 21 inches wide, 29.5 inches tall with the handle. Should have a 2nd section of handl

Single sided porcelain sign, has chips at perimeter and mounting holes, size 20" diameter

Featured here is one of the most unique shallow water diving helmets ever made! This is a Model 15 helmet made by Morse Diving Equipment in Boston, MA. This was the only shallow water helmet Morse off

Featured here is one of the most unique shallow water diving helmets ever made! This is a Model 15 helmet made by Morse Diving Equipment in Boston, MA. This was the only shallow water helmet Morse off

Both lenses have some staining and soiling. Metal body is good. Richmond Auctions guarantees this item to be authentic. For all items in this auction, we offer 1) in-house shipping, 2) local pick up i

Complete on reproduction 15" metal. Lenses have nice color. Minor surface scratching. Displays nicely. Measures: 19.25" x 18" Rating: 8.75-9 Est: $300-$600

Complete on 15" metal. Both lenses have wear and paint loss. Body has little original paint with some pitting in the base. Base is 7". Nice patina look. Measures: 19.5" x 17.5" Rating: 6.75-7.25 Est:

These are the front and back lead weights for an AJ Morse or Morse Diving Equipment Model 15 shallow water diving helmet. These weights are contemporary. The pair weigh 34 pounds in total. Unused in l

Newly cast pair of front and back lead weights for the Morse model 15 shallow water diving helmet. These weights are the correct size, weight and do have Front and Back clearly part of their design, j

17.5" x 23.75" Tin sign with bright colors, high gloss, some toning and minor paint flakes at the edge. PLEASE NOTE, THERE IS ONLY ONE WAY TO PAY FOR ONLINE ITEMS IN THIS AUCTION WHICH IS THROUGH LIVE

15" SSP pump plate sign with bright color and gloss. A few small chips on outer edge. PLEASE NOTE, THERE IS ONLY ONE WAY TO PAY FOR ONLINE ITEMS IN THIS AUCTION WHICH IS THROUGH LIVE AUCTIONEERS. THIS

The ceramic dispense has light wear to the gold trim, has it's pump, 15"T., rated 8.5

The ceramic dispenser has good color, has chip and small crack in the base, has it's pump, 15"T., rated 7

With Sureflo 1 gallon per minute pump. 15 gallon. 32" long x 16" wide. Running. IMPORTANT: Before bidding, please read the terms and conditions. When you registered for the auction you agreed to these

Four very early primitive railroad accessories.   Air pump - 15 1/2" H  Tongs - 10"   

Single 15" lens with fiberglass body has very good color. The field has scratches with small areas of discoloration. The perimeter has staining along the upper edges of the lens. The body is in excell

Lens #1 has staining and areas of paint loss along the lower edges. The reverse has wear and a piece of missing glass along the lower edge. The lenses are mounted on an original high profile metal bod

Texaco Pump Plate 15" diam.

Single 15" lens with original metal body has very good color. The field has small scratches to the lettering. The perimeter has slight discoloration with minor chips along the edges. The body has been

Losses.

Nice vintage ceramic Tango-La soda fountain syrup dispenser. Nice condition with some light wear from use and age. Dated 1918 on bottom. Measures approximately 15" tall with pump by 7 3/4" in diameter

Nice vintage ceramic Hires Root Beer soda fountain syrup dispenser. Nice condition with crazing and wear from use and age. Marked on bottom. Measures approximately 15" tall with pump by 7 1/2" in diam

OPC with screw base. Great patina globe with areas of fading and paint loss. Would look great on a unrestored pump. Measures: 15.5"X14" Rating: 7 Est: $700-$1,200