Stuart Model Steam Engine

Stuart Walking Beam Model Steam Engine, c. 1980 Stuart Turner Ltd., England. Polished steel, cast iron and brass, with a cast single center pillar supporting an overhead balancing beam complete with W

English. 1960s. Cast alloy with brass fittings. Embossed "S" in upper casting. Includes a Stuart Turner Models catalogue from 1963-1964. Untested for functionality. 6"H x 3.25"L x 3"W.

A STUART STEAM ENGINE MODEL , A Large GROVE MILL STEAM PLANT WITH A HORIZONTAL BOILER. A FINE Table top steam ENGINE plant. FULLY ASSEMBLED. The Base measures 15" inches wide by 19" 1/2 inches long.

Vintage Stuart Turner Ltd. large walking beam model steam engine on wood base 12 1/2"H x 16"W x 8"D

A Painted Metal Stuart No. 4 Steam Engine Model 20th Century raised on a wood base. Height of engine 10 inches.  Property from the Estate of Peter F. Stone, Buchanan, Michigan

ENGLISH STUART TURNER MODELS MIXED METALS STATIONARY BEAM MODEL STEAM ENGINE, design of Watts parallel motion, cast-iron base with raised lettering "STUART" and impressed "80083", brass and steel, pai

ATTRIBUTED ENGLISH STUART TURNER MODELS MIXED METALS STATIONARY VERTICAL MODEL STEAM ENGINE, cast-iron, steel, and brass, green painted base fitted with four tabs for securing base, vertical form of a

Stuart gauge, operating condition unknown, copper cylinder, shows some wear throughout, has whistle, 11.5x14x5", rated 8.25

ATTRIBUTED ENGLISH STUART TURNER MODELS MIXED METALS TWIN-CYLINDER MARINE LAUNCH MODEL STEAM ENGINE, cast-iron, steel, and brass, green painted base fitted with four tabs for securing base, mounted on

ATTRIBUTED ENGLISH STUART TURNER MODELS MIXED METALS STATIONARY VERTICAL V10 MODEL STEAM ENGINE AND FEED WATER PUMP,cast-iron, steel, and brass, base fitted with two tabs for securing base and some po

ATTRIBUTED ENGLISH STUART TURNER MODELS MIXED METALS NO. 9 HORIZONTAL MILL/STEAM PLANT MODEL STEAM ENGINE WITH DYNAMO AND PUMP,cast-iron, steel, and brass, green painted base fitted with four tabs for

Three Demonstration Scale Model Engines Length of Stuart Steam engine: 10 inches (25.

STUART STYLE STEAM ENGINE MOUNTED ON WOODEN BASE -- W/ PLEXIGLASS COVER -- 24" L x 11 1/2" x 4" T--POSSIBLE SALESMAN MODEL OR PATENT MODEL

A live steam model of a Stuart Turner Major Beam engine, with beam supported on bright-work turned central pillar with Watt s parallel motion linkage to single vertical cylinder 1 3/4" bore by 3 3/4"

20"x42"x24" working model steam engine, has been sitting in a museum, has not been run in years, WOW! - - -BUYER TO ARRANGE SHIPPING

Has good color, shows wear and paint loss throughout, dual chamber, top pipe has been resoldered, displays well, marked D.R.G.M. 193033, 14x9.75x10.75", rated 7.75

Antique model steam engine 23 1/2"h x 31"w

with plaque that reads: "1889/ This sample of workmanship, designed draught and built by Dr. E. F. Gillon, Wakefield, Mass, 1904" 18" x 14", 15" high

Valve-Controlled Model Steam Engine, c. 1930 Probably Germany, cylinder with maker’s plaque "A. Knabe", brass and cast metal, double-acting cylinder, Ø 2 ½ in., 4 valves, each with it

3 CYLINDER UPRIGHT COMPOUND STEAM ENGINE - BRASS, STEEL, AND ALUMINUM CONSTRUCTION 10 1/4"L X 5"W X 8"H

A vintage Jenson MFG Co model steam engine with restoration documentation. 8 inches high x 15 x 9 1/2. As shown.  Items are sold as is. Please inquire about condition if not otherwise stated.

German. 1910s. Painted steel and tin with nickel-plated components. Stamped, "G.B.N" on platform and engine. (Gebruder Bing Nuremberg). Original surfaces. Minor scattered surface scratches and patches

3 Stuart Steam Engines, c. 1980 Stuart Turner, England. Brass, cast iron and steel. 1) Vertical, Stuart No. 10V, single-cylinder engine, cylinder Ø 1 1/3 in., crosshead guide, flywheel Ø 3 i

Great large vertical early steam engine probably made by Faulk. Measures almost 22" tall, with a 7 1/2" cast iron base. Appears operational, but is missing the burner. Very Good-Excellent