EARLY GERMAN DOLL & CO. OVERTYPE STEAM ENGINE WITH CAST

Twin cylinder overtype; smallest in the model 502 series of three; cast iron firebox with 3 vents. Original brick type stack. Fairly elaborate with ladders and platforms, twin flywheels, etc. Conditio

Original stack with brick light embossment. Red pinstriping to base, pressure gauge and feedwater pump. Some wear. Condition: (Very Good - Excellent). Dimensions: 15 - 1/8" x 12 - 3/4" x 16 - 3/4".

One is marked Doll Company Made in Germany. Steam engine has red brick original stack. Looks to be moderate to heavy use. Larger lineshaft has weighted lever-operated clutch but with little paint on b

German. 1930s. Cast iron, brass and painted components. Exhibits scattered surface losses. Horseless Carriage Museum, Fenelon Falls, Ont. 17 x 15 x 17".

Unmarked but probably Doll Company, all original stacks. Fairly similar except for size; small, medium, and large. Cast iron footed bases. Condition: (Very Good - Excellent). Dimensions: Largest: 11 -

Includes original wooden box marked 1 only 4F steam engine, with label on one end. Original box is missing top sliding piece. Engine itself is horizontal with original red stack. Condition: (Excellent

Nice original condition but needs cleaning; burner missing. Condition: (Very Good - Excellent). Dimensions: 12" x 5" x 12 - 3/4".

One new flag in green and white. When one wheel is activated, two gondolas go up and down over mountain. Some paint loss and wear, mostly to base and roofs. Doll Company decal present on middle portio

DC decal, made in Germany. Ships engine with pressure gauge, weighted safety valve, etc. Some wear to base. Condition: (Very Good - Excellent). Dimensions: 11 - 1/2" x 6 - 1/2" x 14 - 5/8".

Brick type original stack. Levers, dials, DC made in Germany decal on base. Condition: (Very Good - Excellent). Dimensions: 12 - 3/4" x 11 - 1/2" x 16 - 1/2".

Pre War Doll & CO. Germany stationary Locomobile horizontal twin flywheel toy steam engine with cast metal base. Appears to be in overall good cosmetic condition with paint loss, light surface rust, a

German. 1910s. Doll & Co. was founded in Nüremburg, Germany in 1898 by John Sondheim and tinsmith Peter Doll. The company had a variety of both steam engines and steam toys. This ferris wheel can b

Doll Ship Steam Engine No. 352/3, c. 1928 Doll & Co, Nuremberg, Germany. Fixed twin-cylinders, brass boiler, safety valve, steam whistle, cast-metal engine base, blue-lacquered tin base, complete with

Hyde Co. marine double cylinder vertical steam engine, early 20th c., cast brass and iron. 26" h x 22" w x 12"d

Great large vertical early steam engine probably made by Faulk. Measures almost 22" tall, with a 7 1/2" cast iron base. Appears operational, but is missing the burner. Very Good-Excellent

German steam toy accessory. Made of tin and cast iron. Has Doll Co decal. All original with great action. 4 1/2" Excellent

Antique Working Steam Engine Model (America, ca. 1930). Finely engineered model of a 19th century horizontal single-cylinder steam engine, probably early to mid 20th century. Made from cast metal and

An early 20th century engineers model vertical steam engine, of brass, iron and steel construction, the double frame with top mounted cylinder and mounted to a cast iron base

Has a great industrial look, shows wear, displays well, some of the parts are loose, wheel spins freely, badged, 13" tall, rated 7.75

Unmarked, probably Falk. Original red stack, has some accessories, nice pinstriping around base. Condition: (Very Good - Excellent). Dimensions: 15 - 1/8" x 13" x 17".

circa 1935, features Bing firebox, Fleischmann raised piston assembly, and 9" stack. Base 10" x 9" x 7".

Original removable stack, nice partial red highlighting, has original burner in front. Made of brass and white metal. Has been used, but displays well. Condition: (Very Good). Dimensions: 16" x 15" x

One is on a platform, has DC made in Germany metal emblem on side of steam engine. The second is more stationary on footed base. Condition: (Very Good). Dimensions: Largest: 11 - 5/8" x 10 - 3/4" x 7

Marklin metal emblem on side of steam engine. Original stack, "Patent" tag on base. Some fading and use. Condition: (Very Good). Dimensions: 11 - 1/2" x 6 - 1/2" x 13 - 1/2".