Large presentation half-hull model

Large presentation half-hull model, 20th/21st c., American, mounted on wood panel and raised on wood stand with tag reading in part "M/Y Aqualibrium 131' CRN Twin Screw Motor Yacht Handcrafted by Capt

A very good early 20th century half hull model of a freighter, showing precise hand drawn measurements for determining sheer & speed, mounted to an ebonized plaque. Hull dimensions: 64" long x 6" high

An early 20th century half hull model of a freighter, the superstructure showing a mockup of the wheelhouse and upper deck engine room, remnants of a builder's decal affixed to the hull noting 'Montre

MOUNTED BUILDER’S PRESENTATION HALF HULL MODEL OF A CATBOAT20th CenturyUnder original paint, including a red “10” on the sail. Wooden backboard painted blue.Backboard 15” x 11”.

MOUNTED PRESENTATION HALF HULL MODEL OF THE STEEL SCREW TUG "ROMAN"Early 20th CenturyShip built and engineered by J.P. Rennoldson & Sons. Black hull with salmon bottom. Presentation plaque affixed to

Large Half Hull model. "The Great Surgeon". Together with and early photograph of Dr. William H. Thorndike. Known as "The Great Surgeon" for whom the boat was named. Boston area, circa 1880. Condition

Late 20th c. Info on back, 50” by 11” by 4 1/2”

Large Mounted Half Hull Boat Model 61x19

Large Antique Wooden Half Hull Boat Model,4ft Long, Wall Hanging. This is a half hull boat wall hanging made out of wood. The bow and stern of the boat both have a distinctive point at the end, while

Large vintage painted wood half-hull model LYNN OF LORN ARDMORE & CO. LIVERPOOL. 47 in long x 10 in high.

Large old laminated wood half-hull model of a South Shore of MA boat initialed GFH. 33 in long x 7.5 x 5.5 in deep.

Large old carved wood half hull model NO. 221 CABLE SHIP. 5 ft. long (60 in.) by 10.5 in high.

Tow boats, Transfer 13 and 14, Hulls 33-34. New York, New Haven & Hartford R.R. Co. 1899-1900. Backplate 12.5 x 55.5 inches.

M/V Miller Freeman Fisheries Research Vessel Hull 879 with Coast Guard letter and plaque. Good overall condition with some light edge wear. Includes bolts for mounting. Measures at 60" x 11 1/2" x 7"

Large old carved and painted wood half-hull model of the RED JACKET built by George Thomas of Rockland, Maine. 65.6 x 15 x 5 in deep.

Large vintage carved and painted wood half-hull model of the CAMBRIAN built by Green and Lowden of London in 1854. 57 in long x 13.5 x 3.5 in deep.

White nautical ship builder's half hull boat model. This large boat model is the perfect statement piece for anyone who loves boating or the craft of boat making. The piece can hang on the wall. The d

Large ships half model of a sailing ship. Black hull mounted to a red board. Dimensions: 60 long by 10 tall

Scale half model of the British Royal racing yacht “Britannia”. Large model with hull painted black over bronze. Planked deck with skylights, tiller, companion ways, stubbed mast, anchor,

It appears to be Unsigned. The hull and triangular plaque are not attached; the hull rests on the two large pegs. The Hull measurements are 39 3/4" long 8" wide, and 12 1/2" tall. The plaque measures

MOUNTED BUILDER’S HALF HULL MODEL OF THE STEAM/SAIL YACHT “RAMACE FERGUSON”Late 19th CenturyBuilt up in six visible lifts. Black hull with natural wood bottom. Identifying plaque on

A Nautical Half Hull Model 20th Century identified as the SS Cedartree / Built by John Crown & Sons Ltd - Sunderland / 1928 / For / The Tree Steamship Co Ltd / Howard - Jones Ltd Managers / Cardiff. h

H E BOUCHER HALF HULL MODEL, BOAT MEASURES 55" LONG, ON MAHOGANY BOARD, STAMPED ON BACK, AS PICTURED, FROM BROOKLYN NEW YORK ESTATE

MOUNTED BUILDER'S HALF HULL MODEL OF THE DOWNEASTER "ST. JOHN"America, 19th CenturyBuilt up in eleven alternating pine and mahogany lifts. Small carved billethead below bowsprit.Dark green b