Solid Brass Fire Nozzle on Turret from a Ship

Antique 10" and 6" solid brass fire nozzles .Three-hook wall hanging placket and a fire department post sign.

Antique (2) 12" solid brass fire nozzles and (2) solid brass close shut off valves.

6 3/4"x3", 2" ID

Largest 24"x6 1/2"

[2] Vintage Solid Brass Fire Hose Nozzles, Elkhart Brass Mfg. Co. Original patina. Size: 12h, 10h

3 VINTAGE SOLID BRASS FIRE HOSE NOZZLES. 7.5'' 8'' AND 10''. SHOWS PATINA. THE SMALLEST ONE LOOKS LIKE SOMETHING COULD BE ADDED TO THE TOP.

Ship Aft Wheel-Hyde Windlass Co. Bath, ME, USA, Solid brass stand, Cast Iron Wheel with wooden handles, solid brass turret. Mounted on hardwood board.

This is most likely an Antique EUREKA FIRE HOSE CO solid brass nozzle. 30 inches long. Likely from the early 1900s. This nozzle has definitely seen its fair share of fires. Age and use appropriate con

16" Solid Brass Ships Bell, El Rio Brass Bell with custom-made stand, Ship was built in 1899, sunk by collision in 1942

Solid Brass Ship's Wheel on Stanchion, marked "John Hastie & Co. Ltd., Engineers, Greenock (England)" with degree declination arrow indicator, the wheel having 8 spokes, 42" diam. 52" tall overall, 33

Ship's bridge telegraph with twin faces displaying ship's commands. Highly polished and electrified to light its face up brightly. The successful bidder will have the option of removing this item fro

This is a classic piece of salvaged ship equipment! This is an authentic solid brass ship steering wheel. It measures 41.5 inches wide and weighs approximately 70 pounds. The brass features a very nic

Ship's porthole converted to a mahogany side table that has a lower shelf fashioned as ship's grating. Solid brass porthole with hinged port secured with two dogbolts. Dimensions: 23" (height) x 19 1/

Highly polished ships porthole with lacquer finish mounted to a custom bar height table with ship grating shelf below. Shelf has floor guards. Hinged glass port. Dimension: 42 H” x 24 L” 6

Porthole comes from the ocean liner "Homeric", formerly the "Mariposa". The heavy porthole is of the "flower pattern". Base is mahogany with ship's grating shelf. Dimensions: 27" H (with handle) x 24"

Antique solid brass ship's bell with turned brass exterior. Heavy clanger. Dimensions: 12" H x 10" diameter Weight: 27lbs

15" Solid Brass Ship Bell with custom bracket, Steamer A.E. Nettleton-Great Lakes Steam Ship, #6280, built 1908, 525 ft. vessel, with steel custom stand

Solid Brass Ship Oil Lamp with Glass Reservoir, Adams & Westlake Co., Pat. May 6, 1930, Chicago, IL, both glass are perfect, highly polished brass, with solid mounting plate

Shps engine room telegraph by Joseph Harper and Son of New York. Polished faceplate with ship commands. This model would be mounted in the engine room and rings very loudly because of the high level o

Solid brass ship's throttle and gear assembly from a yacht. Three levers rise from the heavy brass housing. To a mahogany base with rope carving. Quite heavy. Face is 7" diameter x 13" overall height

Inside lid states "Shipbuilders Great Lakes Engineering Works, Detroit". Brass ship's porthole from an unknown Great Lakes freighter. Roughness on one spot on glass but very good condition. Body is br

Brass ship’s lantern with clear Fresnel glass lens with removable red lens. Meticulously polished and lacquered. Mounted to a thick wood base with routed edge. Wired for electricity. Very fine condi

Fine, old six-spoke brass ship’s wheel with wood handles, pierced hub with slot for keyway. 18 1/2” diameter.

Ship's anchor lantern with Fresnel glas lens, hoisting ring, oil burner, protective bars, tether rings etc.. Highly polished. Overall Dimensions: 7" diameter x 17" H