2 Brass Decorative Diving Helmets & Diving Helmet Clock

This lot is made up of 2 copper and brass decorative diving helmets. Both are nicely detailed and have a developed an authentic patina. Both measure approximately 7” tall and weigh 2 pounds 5 ounces

Nicely sized copper and brass diving helmet display clock. The quartz clock works perfectly and is easily adjustable. The helmet is mounted to a very nice wood stand. The very top and left side window

Vintage Nautical Brass Copper Diving Helmet Clock. 8.5 inches H x 9.5 W x 7 deep.

A DECORATIVE BRASS DIVING DIVING HELMET THAT MEASURES 6 1/4" TALL BY 9" LONG. CONDITION IS GOOD BUT IT DOES HAVE SOME MINOR WEAR. STILL A NICE LITTLE DECORATORS PIECE. SHIPPING AND HANDLING IS $10 WIT

Russian Navy Cooper & Brass Diving Helmet, with Cyrillic inscription: factory #26, helmet #136, circa 1965 {Height 17 1/2 inches, width 15 1/2 inches}

A adult-scale brass diving helmet and collar replica, bright 2-tone brass with wing nut closure (JRUB8002/2) {TC} Measurements: 19" H overall

The Yokohama Diving Co., Ltd 12 Bolt Japanese Copper and Brass Diving Helmet Presented on a Associated Wooden Base. Company emblem attached to the surface. Helmet measures 17" x 14-1/2" x 16-1/2". Est

Includes pair of brass twist candlesticks, 2 lighters, brass lock paperweight, mounted lighter and antique deep diving helmet, and iron base.

This unique rubber mask was made by the Thompson Engineering Company during World War 2. This type of shallow water helmet TECO mask was used in place of traditional shallow water copper & brass helme

This unique rubber mask was made by the Thompson Engineering Company during World War 2. This type of shallow water helmet TECO mask was used in place of traditional shallow water copper & brass helme

Set includes a diving helmet, binnacle, sextant, compass, telescope and a ship telegraph. Comes with a wooden case. Case measures 9.5"L x 3"W x 2"H, each piece is approx. 1"H.

Reproduction of an early 20th Century diver's bolted hard hat helmet. Good overall condition with normal storage wear. Measures approximately 7 1/2 in. 6 1/2 in. x 6 1/2 in. MMB in house USA continent

This unique rubber mask was made by the Thompson Engineering Company during World War 2. This type of shallow water helmet TECO mask was used in place of traditional shallow water copper & brass helme

Complete set of twelve diving helmet wing nuts. These are made of brass and do thread onto Yokohama helmets. Appear to be contemporary, some of the threaded holes are not perfectly center. All items w

Nice vintage tee wrench consistent with a style used with Japanese diving helmets. Has CDC stamped on it. Measures 3 and 7/8 inches long and the handles is 3 and 15/16 inches wide. Please refer to pho

Grouping of seven brass diving helmet wing nuts. We are not sure of the specific model of helmet these would be used on, but possibly on Japanese, Chinese or Korean helmets. All are in good condition,

Incredible opportunity to own possibly the earliest and unique known Miller Dunn diving helmet in existence! This 1915 Divinhood is unique, as we will detail below. This helmet was featured in issue 1

Contemporary made brass diving helmet with ID plate for U.S. Navy Mark V Diving Helmet issued 8/20/41. In good condition but has heavy green patina. Makes a great display piece. Measures 18" tall, 15"

European Copper / Brass Diving Helmet - 18 in tall x 19 x 13

Contemporary set of four weights that will fit the Miller Dunn Divinhood Style #1 and or #2. Each lead weight has the correct copper tab on back and Miller Dunn company information on the front. Each

Antique Copper & Brass Diving Helmet {Dimensions 17 x 17 x 16 inches}

Copper & Brass Diving Helmet in VG Cond.

US Navy copper & brass diving helmet, mounted on wood base, height is 17.5"

Copper / Brass Diving Helmet - 16 in tall x 16 x 14