Apollo X Flown Kapton Foil on Display

A fairly large piece of Kapton Foil from the Apollo 10 Command Module named "Charlie Brown". This Kapton Foil sample is stored in a plastic pocket that is mounted to the COA that is from Robert Miner

There are three sections of Kapton Foil removed from the Apollo 11 Command Module after the mission. This protective foil covered the entire Command Module and flew to Lunar Orbit as part of the space

Two sections of Kapton Foil that were Flown to the Moon as part of the Thermal Protection System to the Apollo 16 Command Module "Casper". These two sections are contained in a plastic display case th

This beautiful Lucite display contains Kapton Foil from the Lunar Module 'Spider' and was produced by the Astronaut Scholarship Foundation. It is number 163 of 200 and contains a section of Kapton Foi

Three Displays of Flown Kapton Foil from Apollo 11, 13, & 16 Missions Three displays of space-flown pieces of Kapton Mylar foil from the Apollo 11, 13, and 16 missions. The foil provided thermal p

Another Apollo 13 Flown Kapton Foil sections incased in a plastic container and mounted on a beautiful display card. There are two Kapton Foil sections incased in a 2" diameter plastic container that

Three Displays of Flown Kapton Polyimide Foil from Apollo 11,13, and 16 A group of three of displays of space-flown pieces of Kapton Mylar foil from the Apollo 11, Apollo 13, and Apollo 16 missions. T

Two substantial sections of Kapton Foil flown to the moon on the Apollo 11 mission. These fragments are encased in a plastic container and have a combined overall measurement of about 2" x 1 1/2". Inc

Apollo 13 Flown Kapton Foil. Ex. American Space Museum Kapton Foil, .675" x 1", was flown to space and removed from the Apollo 13 Command Module after the recovery. Encapsulated by CAG to a size of 2.

Apollo 13 Flown Kapton Foil. Ex. American Space Museum Kapton Foil, .675" x 1", was flown to space and removed from the Apollo 13 Command Module after the recovery. Encapsulated by CAG to a size of 2.

An authentic section of Kapton Foil for the Lunar Module #6 better known as "Intrepid". This section measures about 6" x 6" and comes from Lunar Module Engineer, Marty Winkle. He retained the section

Apollo 13 Kapton Foil flown to the Moon and back and removed from 'Odyessy'. This is a substantial piece of Kapton Foil measuring 1 3/4" x 7/8" with a second smaller section both sealed in a 2" round

NASA FLOWN APOLLO II "KAPTON" POLYMIDE FOIL. PROVIDED THERMAL PROTECTION FOR COMMAND MODULE COLUMBIA 11" X 8 3/4" All items Located in Hollywood Florida Warehouse. Thank you for your inquiry about shi

Apollo 13 Flown Kapton Foil Fragments. There are two sections of Kapton Heat Shield Insulation that was part of the Apollo 13 Command Module "Odyssey" and was flown around the Moon on the Apollo 13 mi

Sections of Kapton Foil Flown to the Moon and removed from the Apollo 11 Command Module after recovery. These Kapton Foil fragments are affixed to an informative COA from long time space enthusiast, K

Two small fragments of flown Kapton insulation from the Apollo 13 Command Module #109 "Odyssey", housed in small plastic container, 2 1/4" diameter.

Apollo 13 Kapton Foil, Buzz Aldrin Signed Book and Shuttle Flown Items. Includes the following (1) Apollo 13, two flown kapton foil peices attached to an LOA by Sandy Clarkson from The Right Stuff Inc

Apollo 11 Piece of Flown Kapton Foil w/ NASA Provenance A small piece of flown Kapton foil from the Apollo 11 Command Module Columbia, measuring approximately one-eight of an inch in length and housed

Original 11 pieces of Kapton Foil flown on Apollo 8

Apollo 13: Large segment of Flown Thermal Mylar Film Coating, "Kapton Foil" with Vague Letters and COA. Apollo 13: Flown Thermal Mylar Film Coating "Kapton" foil segment with vague letters that appear

Apollo 13: Three Segments of Flown Thermal Mylar Film Coating, "Kapton Foil" with COA. Apollo 13: 3 flown Thermal Mylar Film Coating "Kapton" foil segments (officially GT-131 Thermal Control Coating L

Apollo 13: Two Segments of Flown Thermal Mylar Film Coating, "Kapton Foil" with COA. Apollo 13: 2 flown Thermal Mylar Film Coating "Kapton" foil segments (officially GT-131 Thermal Control Coating Lam

Group of two Kapton insulation fragments from the Apollo 11 Command Module "Columbia." One side showing the gold foil that was affixed to the CM; the other side showing the blue-tinted silve

Flown fragment of Kapton foil insulation from the Apollo 13 mission. Behind a piece of tape affixed to an envelope and certified authentic. The envelope depicting the lift-off of the Apollo 13 shuttle