Half Model Screw Steamer's Gogovale &Gretavale

MOUNTED PRESENTATION HALF HULL MODEL OF THE STEEL SCREW TUG "ROMAN"Early 20th CenturyShip built and engineered by J.P. Rennoldson & Sons. Black hull with salmon bottom. Presentation plaque affixed to

This pine half model of a sloop yacht is set on a shield shaped, plywood backing. The model is secured with brass screws.

A ship builder's half-block model of a New York steamer Early 20th century The pinewood model painted black above the waterline, with details including lifeboats on davits, in mirror backed glass disp

BUILDER'S HALF HULL MODEL OF A STEAM-POWERED SAILING VESSELLast Half of the 19th CenturyBuilt up in nine lifts. Screw shaft molding at stern.Height 9.5". Length 50.5".Provenance:Hyde Park

Large presentation half-hull model, 20th/21st c., American, mounted on wood panel and raised on wood stand with tag reading in part "M/Y Aqualibrium 131' CRN Twin Screw Motor Yacht Handcrafted by Capt

John Taylor (American, B.1954) "The Eliza Anderson"a model ship interpretation of the 1856 paddle steamer made from found materials to look as if the vessel had been buried or under water for half a c

Extremely rare shipyard builders half model of the United States Lighthouse Service Lighthouse Tender Juniper. Launched in 1939 just before the USLHS became The United States Coast Guard. The Juniper

EXTREMELY rare shipyard builders half model of the United States Lighthouse Service lighthouse tender JASMINE. Jasmine was built by the Dravo Contracting Company in Pittsburgh Pennsylvania in 1935. Th

"Screw Steamers Swanland & Hawk" watercolor and ink. 15 1/2 x 22 1/2 inches. signed. framed 24 1/2 x 31 1/2 inches.

MOUNTED BUILDER’S HALF HULL MODEL OF THE STEAM/SAIL YACHT “RAMACE FERGUSON”Late 19th CenturyBuilt up in six visible lifts. Black hull with natural wood bottom. Identifying plaque on

Robert E. Lee Paddle Steamer Model in Display Case. Approx. 34"H x 70.5"W x 22.5"D. Photos are considered part of the description and condition.

A Nautical Half Hull Model 20th Century identified as the SS Cedartree / Built by John Crown & Sons Ltd - Sunderland / 1928 / For / The Tree Steamship Co Ltd / Howard - Jones Ltd Managers / Cardiff. h

White nautical ship builder's half hull boat model. This large boat model is the perfect statement piece for anyone who loves boating or the craft of boat making. The piece can hang on the wall. The d

Large impressive Victorian diamond brooch made of 18K Gold integrated with silver (acid tested by the auction house) set with fine old mine cut diamonds in SI-VS quality and E-G colors (except for one

Large Half Hull model. "The Great Surgeon". Together with and early photograph of Dr. William H. Thorndike. Known as "The Great Surgeon" for whom the boat was named. Boston area, circa 1880. Condition

An early 20th century half block model of a salmon With original hand painted colours, and carved as swimming from left to right, 84cm long x 24.5cm high (33in long x 9 1/2in high) For further informa

H E BOUCHER HALF HULL MODEL, BOAT MEASURES 55" LONG, ON MAHOGANY BOARD, STAMPED ON BACK, AS PICTURED, FROM BROOKLYN NEW YORK ESTATE

MOUNTED BUILDER'S HALF HULL MODEL OF THE DOWNEASTER "ST. JOHN"America, 19th CenturyBuilt up in eleven alternating pine and mahogany lifts. Small carved billethead below bowsprit.Dark green b

DR. RICHARD L. STANLEY COLLECTION. WAGON BUILT BY JACK BARSTOW, DIAMOND JIM PAKER, CMB, RING #89, TAMPA, FLORIDA. BUILT AS A HALF SCALE MODEL OF THE RINGLING WAGON, THIS WAGON BOASTS FAUX CALLIOPE SID

A half-hull model of a 1920s flat-top cruiser with the original canopy deck and fittings. The cabin has glass windows and retains the original railing. The top and backboard are in cream paint contras

Framed half hull wall model of "Mariette" of 1915, the half hull complete with decking, the 42m classic twin-masted schooner Mariette of 1915 was originally built by Herreshoff in United States, 13.5"

A maritime model of a steamerlate 19th/early 20th centuryIn a stained walnut and glass case..overall height 21in (53.5cm); length 44in (112cm); depth 14 1/2in (37cm) Provenance:Property from th

A half hull ship model of the SS Oratios Cuppas, Builder Craig, Taylor & Co Ltd., with plaque inscribed 'S.S. Oratios Couppas, owner Nicholas Couppa Esq., Marseilles, Builders Craig Taylor & Co Ltd. S

Tow boats, Transfer 13 and 14, Hulls 33-34. New York, New Haven & Hartford R.R. Co. 1899-1900. Backplate 12.5 x 55.5 inches.