TOC Ernst Plank Model Steam Engine

Has good color, shows wear and paint loss throughout, dual chamber, top pipe has been resoldered, displays well, marked D.R.G.M. 193033, 14x9.75x10.75", rated 7.75

C. 1902 Scale Model of Steam Engine by Ernst Plank of Nuremberg. 4.5"W x 6"Deep x 13"H

ERNST PLANK steam engine with ferris wheel, around 1900, drive model, mounted on a wooden board, board 39 x 14 cm, used, scratches on the paintwork, without burner German Description ERNST PLANK Dampf

Ernst Plank steam engine with separate four-wheel transmission, both retaining original maker's plate and are mounted on wood bases, engine outfitted with a governor, 10'' h., 7'' w.

steam powered flywheel with governor on wood base in original box with colorful paper label; housing retains makers' brass plaque engine on base 5.25" w. x 8.5" t. x 5" d.

Ernst Plank Cosmos steam engine, in its original box, 13'' h., 4 1/2'' w.

Circa 1910 Ernst Plank Vertical Steam Engine. All original with EP nameplate. Comes with Wilesco Machine Shop Accessory that has hammer, grinder, and saw. Steam Engine measures 11" Tall. Very Good-Exc

All original. Wheel has breaks. 14" Very Good

Very hard to find early 20th century Ernst Plank electric steam engine. All tin construction with 7" by 7" base. 11" tall to top of chimney. Has general wear, and some dings to boiler. Includes origin

4 Toy Steam Engines 1) Ernst Plank, horizontal steam engine with dynamo, boiler heavily modified, with additional manual feed pump, converted to gas heating, without chimney, dimensions of the basepla

276. ERNST PLANK PUPPET VALVE STEAM ENGINE | Circa 1895. | 13" h. x 12" l. | Stack and tin base holding flywheel is repainted, otherwise in All Original Condition. | $300 - $600

Vintage Ernst Plank toy stationary steam engine, Hercules. Manufactured by Ernst Plank Co of Nuremburg Germany in the early 20th century. Small metal plates read, E.P and Hercules. Pressed metal toy o

ERNST PLANK EXCELSIOR, standing steam engine, 35 cm, base casting, handpainted, brass boiler, burnished, with feed pump, burner, manometer, glass is cracked, water level glass, whistle, funnel, optica

1041. ERNST PLANK HERCULES STEAM PLANT | Desirable engine, small scale. | 12" h. | (Excellent to Pristine Condition) | $600 - $900

Including; Weeden 110 volts upright steam engine and ERNST PLANK "Noris" 1903 standing steam engine. Measuring approx. 11 1/4" to 13 1/2" tall. In age appropriate condition, see photos.

Including; Weeden 110 volts upright steam engine and ERNST PLANK "Noris" 1903 standing steam engine. Measuring approx. 11 1/4" to 13 1/2" tall. In age appropriate condition, see photos.

Fleischmann, Steam Engine + Drive Models on Wooden Planks, W.-Germany, min. paint d., C 2

Includes European-style engine in green with burner on bottom, "EP" plate on backside of engine and with matching green four-wheel tender. There is one green passenger car labeled "I" and "II" with op

1:12 Scale Model of a High-Pressure Steam Engine Designed by Dr. Ernst Alban Built by A. Walshaw (1992), oscillating cylinder Ø 1 in., flywheel Ø 10 in., belt-driven working governor (missin

Steam powered, TOC, very detailed, metal and paint show signs of wear throughout, great color and look, displays very well and functions as it should, 20x19.75x10 mounted on wooden gallery, rated 8.75

Two Arcade cast iron Fairbanks Morse toy engines, 4'' l., together with a Plank steam toy grinding wheel, a lathe, an aluminum engine model, etc.

20"x42"x24" working model steam engine, has been sitting in a museum, has not been run in years, WOW! - - -BUYER TO ARRANGE SHIPPING

Antique model steam engine 23 1/2"h x 31"w

with plaque that reads: "1889/ This sample of workmanship, designed draught and built by Dr. E. F. Gillon, Wakefield, Mass, 1904" 18" x 14", 15" high