Victorian Jewelers Regulator Floor Clock

Victorian Jewelers Regulator Floor Clock, please carefully review the many images to supplement this description, possibly Gilbert, there is a 10 stamped into iron chiming rods above and behind the mo

Waterbury Jewelers Regulator pinwheel escapement tall case/ grandfather clock, c.1900, housed in a late Victorian two section wood case, the single weight-driven movement has a circular brass frame ar

Circa 1870's Gilbert #8 Jeweler's Floor Regulator with Egyptian head crest , porcelain dial & large lyre pendulum. Clock 106" tall, 33" wide, 13" deep. Good condition.

1890's William L Gilbert jeweler's regulator clock, two part walnut case floor model, overall height 90", with 11" enamel dial, originally from the H. R. Kimball Pharmacist & Jeweler in Hardwick, VT (

Gilbert No. 8 Hanging Jewelers Regulator Clockcirca 1910the cherry case with carved foliate and a maiden's head, 12-inch porcelain dial with Roman hour numerals, 8-day movement with pinwheel escapemen

(8) day time Length- 85" Width- 20" No in-house shipping available for this item View our list of Recommended Shippers

Wm. L. Gilbert Clock Co., Winsted, Conn., "Regulator No. 8 Standing" jeweler's regulator in a cherry case with burl panel on backboard, carved crest with Egyptian motif, roman numeral white enamel dia

Ansonia Clock Co., New York, NY, "Regulator No. 14" hanging jeweler's regulator in a carved walnut case with carved appliques and crest, roman numeral white enamel dial with sweep seconds, 8 day, time

German 3 Wt. Vienna Regulator Floor Clock. 7 in. inset porcelain dial signed "Moritz Neurath" with black Roman hour numerals, fancy blued hands, gilt engraved inset center with gilt brass filigree bez

Gilbert Clock Co. Jeweler's Regulator Clock with Three Jar Mercurial Pendulumearly 20th centuryoak case, 8-day weight-driven movement with maintaining power and deadbeat escapement60 x 20 1/2 x 10 inc

Turn of the Century Jewelers Regulator Clock in mahogany case w/ Ornamental Stenciling, approx 19.5" x 8.5" x 68"

Walnut Victorian regulator clock. ht. 38in.

19th c. Victorian regulator clock. 12" x 6" x 36".

Antique Victorian Regulator Clock in Carved Walnut Case. Includes 2 weights and a pendulum. Measures 25" H x 17-1/2" W x 7-1/4" D. The gallery does not warranty the running condition of clocks. Condit

Victorian Regulator clock. Retains weight and pendulum. 41 1/2" L..

Walnut Victorian regulator clock with porcelain dial, 37 inches tall

Victorian regulator clock, the face marked "œIngraham".

Victorian regulator clock. 13 1/2" x 6" x 29".

A late 19th century Long Running Vienna Regulator floor clock by Johann Salfer, Wien. High quality 120-day weight movement with deadbeat escapement and maintaining power, a two part porcelain dial wit

Victorian regulator clock case, approx. 24 1/2" H. Oak regulator clock by Ingram. From a Hasbrouck Heights, NJ collector. Ingram clock missing pendulum.

19th c. Victorian Regulator clock. 43" L..

Victorian regulator clock case, approx. 24 1/2" H. Oak regulator clock by Ingram. From a Hasbrouck Heights, NJ collector. Ingram clock missing pendulum.

Walnut Jeweler's Pinwheel Regulator Clock. 11-inch porcelain dial with black Roman hour numerals, open moon hands, sweep seconds hand and brass bezel, typical pinwheel regulator movement, pinwheel esc

Ansonia Pinwheel Jewelers Wall Regulator Clock. Large walnut rectangular case, molded cornice surmounted by carved crest and finail. The dial has a Roman numeral chapter ring that is mounted within a