A miniature brass early model vertical steam engine, attributed to Stuart Turner

ATTRIBUTED ENGLISH STUART TURNER MODELS MIXED METALS STATIONARY VERTICAL MODEL STEAM ENGINE, cast-iron, steel, and brass, green painted base fitted with four tabs for securing base, vertical form of a

ATTRIBUTED ENGLISH STUART TURNER MODELS MIXED METALS STATIONARY VERTICAL V10 MODEL STEAM ENGINE AND FEED WATER PUMP,cast-iron, steel, and brass, base fitted with two tabs for securing base and some po

ATTRIBUTED ENGLISH STUART TURNER MODELS MIXED METALS TWIN-CYLINDER MARINE LAUNCH MODEL STEAM ENGINE, cast-iron, steel, and brass, green painted base fitted with four tabs for securing base, mounted on

ATTRIBUTED ENGLISH STUART TURNER MODELS MIXED METALS NO. 9 HORIZONTAL MILL/STEAM PLANT MODEL STEAM ENGINE WITH DYNAMO AND PUMP,cast-iron, steel, and brass, green painted base fitted with four tabs for

A miniature brass early model steam engine, 5"h x 2.75"w.

Stuart Walking Beam Model Steam Engine, c. 1980 Stuart Turner Ltd., England. Polished steel, cast iron and brass, with a cast single center pillar supporting an overhead balancing beam complete with W

An early 20th century engineers model vertical steam engine, of brass, iron and steel construction, the double frame with top mounted cylinder and mounted to a cast iron base

English. 1960s. Cast alloy with brass fittings. Embossed "S" in upper casting. Includes a Stuart Turner Models catalogue from 1963-1964. Untested for functionality. 6"H x 3.25"L x 3"W.

ENGLISH STUART TURNER MODELS MIXED METALS STATIONARY BEAM MODEL STEAM ENGINE, design of Watts parallel motion, cast-iron base with raised lettering "STUART" and impressed "80083", brass and steel, pai

3 Stuart Steam Engines, c. 1980 Stuart Turner, England. Brass, cast iron and steel. 1) Vertical, Stuart No. 10V, single-cylinder engine, cylinder Ø 1 1/3 in., crosshead guide, flywheel Ø 3 i

3 Stuart Steam Engines, c. 1980 Stuart Turner, England. Brass, cast iron and steel. 1) Vertical, Stuart No. 4, single-cylinder Ø 2 1/8 in., crosshead guide, flywheel Ø 4 1/2 in., overall ht.

Miniature Working Model of a Walking Beam Steam Engine, c. 1850 Marked "W & S Jones, 30 Holborn, London", all-brass machine parts, Watt-type 6-column low-pressure balancing steam engine, vertical cyli

A live steam model of a Stuart Turner Major Beam engine, with beam supported on bright-work turned central pillar with Watt s parallel motion linkage to single vertical cylinder 1 3/4" bore by 3 3/4"

Gigantic Brass Vertical Boiler Steam Engine attributed to Stevens Dockyard ca 1900. This absolutely massive and comes with original smokestack and has great riveting on the boiler. Toy does not have a

A German miniature vertical "still" steam engine model, 15"h x 5"w x 7.5"d

Vintage Stuart Turner Ltd. large walking beam model steam engine on wood base 12 1/2"H x 16"W x 8"D

Unmarked but probably Doll Company, all original stacks. Fairly similar except for size; small, medium, and large. Cast iron footed bases. Condition: (Very Good - Excellent). Dimensions: Largest: 11 -

Hyde Co. marine double cylinder vertical steam engine, early 20th c., cast brass and iron. 26" h x 22" w x 12"d

American. . Painted steel and brass wood base. 14 x 8 x 6". Fully functioning. CODE:TOY

A Brass and Wood Vertical Steam Engine Model 1901 signed Made / By / (partially legible) and dated 1901 on base. Height 14 1/2 x width 10 x depth 8 1/2 inches (with base).

American. . Painted steel and brass on turned wood base. 13 1/4 x 8 x 8". Fully functioning. CODE:TOY

Well engineered model of an early over type vertical steam engine, first patented in 1797. They were typically used in collieries for any sort of power that was needed. Engine is mounted onto wood pla

An early 20th century model steam engine marked Weeden, trade mark, reg. U.S. patent office. 10 inches high x 10 x 5. (missing burner horizontal). As shown.  Items are sold as is. Please inquire abou

Precision Model of a Vertical Steam Engine, c. 1930 Brass and steel, mahogany-lagged brass-bound single cylinder Ø 1 7/10 in., with reversible direction of rotation, sliding control with eccentri