2 Rustic Table Lamps with Mica Shades

2 Wicker for table lamps, carmel slag panel shade, 2 mica shades

Arts & Crafts Style Iron Lamp, with paneled shade, single socket fixture, 21 3/4" high, 12 1/2" sq. Good condition.

MODERN MISSION OAK TABLE LAMP WITH MICA SHADE, LAMP MEASURES 21" TALL, SHADE IS 19 1/2" X 19 1/2", AS PICTURED

Lot 46 Roycroft Copper & Mica Table Lamp Roycroft hammered copper and brass table lamp with mica shade over single socket diameter: 12 inches height: 17 1/2 inches Additional Information: with make

CONTEMPORARY ARTS & CRAFTS STYLE COPPER TABLE LAMP WITH MICA SHADE, MARKED ON BASE. TRIPLE SOCKET. GOOD CONDITION. 20 1/2" DIAM x 22" H. THIS ITEM EXCEEDS SIZE LIMITATIONS FOR IN HOUSE SHIPPING.

SIGNED MICA LAMP CO USA. ARTS & CRAFTS MICA SHADE TABLE LAMP, TRIPLE SOCKET. COPPER STRAPPED. GOOD CONDITION. 20 1/2" DIAM x 25" H. THIS ITEM EXCEEDS SIZE LIMITATIONS FOR IN HOUSE SHIPPING.

Patinated bronze table lamp base fitted with Arts & Crafts mica shade, Meriden, CT, early 20th c.; Marked HANDEL; 23" x 7 1/2" dia.

Pair of arts & crafts table lamps, etched amber glass with bronze bases and fittings, both marked on bottom #1310, with mica shade, lamps are 18" t. excluding finial, shades are 8 1/2" x 9" x 3 3/4"

Hammered copper body with studded detail, mushroom shaped Mica shade. Made by Michael Adams for Aurora Studios. Signed Prototype #2 12/95 with initials. Dated 1995. H.: 58 cm (23 in.)

Mica shade. Hammered copper. Modeled after Dirk Van Erp. Arts & crafts. #55. Sept. 07,2000, signed and dated, Michael Adams. Approx. 20" H x 23 1/2" W. Small peeling on shade.

signed; with mica shade; the tile depicting a ship; Condition: slight wear throughout; 10 1/4 inches square; 20 1/2 inches high

Period 1930's lamp measures 25 1/2" tall and 18 1/2" wide. The mica shade decorated in geometric designs with paint loss. The lamp base in green and black geometric designs, body is good, base has spl

Stickley Brothers table lamp Grand Rapids, Michigan hammered copper, mica unmarked hexagonal shade and conforming body 21"w x 19"d x 22 1/2"h

with a 16" diameter mica octagonal shade. 31" tall. Lamp base is in good working condition with 2 replaced sockets. Shade does have some flaking. From the Ralph Kylloe Collection.

with mica-inset shade; Condition: working condition untested and unknown; mica panels loose; 12 inches wide; 26 1/2 inches high

CONTEMPORARY ARTS & CRAFTS STYLE LAMP WITH MICA SHADE. SINGLE SOCKET, GOOD CONDITION. 26 1/2" H

circa 1915, conical shade set with four mica panels within hammered copper frame, 7-1/2 x 14-1/2 in.; supported on four curved arms and hammered copper base, with windmill stamp and "San Francisco/Dir

circa 1915, conical shade set with four mica panels within hammered copper frame, 7-1/2 x 14-1/2 in.; supported on four curved arms and hammered copper base, with windmill stamp and "San Francisco/Dir

Dirk Van Erp (Dutch-American, 1860-1933) Table Lamp hammered copper, mica closed box windmill stamp to underside H 19 1/2 x diameter of shade 16 inches.

Arts & Crafts bronze table lamp, the base circa 1900, with modern curved mica rectangle bell design #2 shade marked "NYM Arts". [26 1/2" H x 16" W x 11" D]. Scattered marks to base; wire frayed.

Dirk Van Erp (Dutch-American, 1860-1933) Table Lamp with Vented Cap hammered copper, mica closed box windmill stamp to underside H 19 1/2 x diameter of shade 17 inches.

Contemporary Arts & Crafts Table Lamp Mica Shade, Telescoping Base. size: vase 27h 6.5w shade 7h 15.5w

Gustav Stickley Arts & Crafts Modern-Contemporary Table Lamp Mica Shade in Most likely an Oak Wood Finish Marked on the Bottom Stickley 2001 27" H x 18" L x 18" W Out of a New York City Estate

Attributed to Karl Springer, c. 1970's. A pair of contemporary lattice pattern Lucite table lamps with chrome fittings. Unmarked. Approx. h. 27.25" (top of finial), w. 7.875", d. 3"; width of shade 17