(6) EAMES HERMAN MILLER EVANS PROD. DCW CHAIRS

Exceptional and rare set of (6) bent plywood DCW chairs in ebonized finish, designed by Charles & Ray Eames for Herman Miller and produced by Evans Products, c. 1947-1950. Five of the six chairs with

Set of (6) iconic Herman Miller for Eames DCW side chairs in molded plywood with Santos Palisander finish, from Design Within Reach c. 2013. Eames and DWR labels underneath. Dimensions: H 28.75" x W 1

Model "LCW" lounge chair in molded birch plywood, designed by Herman Miller for Eames in 1946. This example is a rare early production, manufactured by Evans Products between 1947-1950. Labeled undern

Charles Eames (1907-1978) & Ray Eames (1912-1988) for Evans Products / Herman Miller DCW chair Zeeland, Michigan, 1945 walnut, rubber signed with decal manufacturer's label to underside 19 1/4"w x 22"

Charles and Ray Eames for Herman Miller & Evans Products. Walnut molded plywood with rubber mounts. Evans label to underside. Circa 1950Õs DCW Dining Chair. Dimensions: H: 29 inches: W: 19 inches: D:

Walnut veneer. Early Herman Miller/ Evans/ Charles Eames label to bottom. Appears to be original finish, screws, shock mounts,etc. Some looseness to seat back (single shock mount). Minor small veneer

Charles and Ray Eames DCW Evans Products/Herman MillerUSA, 1945aniline-dyed ash plywood, rubber29 h × 19 w × 21 d in (74 × 48 × 53 cm) Chair features 5-2-5 hardware

Charles and Ray Eames DCW Evans Products/Herman MillerUSA, 1945molded walnut plywood, rubber28.75 h × 19.25 w × 22 d in (73 × 49 × 56 cm) Chair features 5-2-5 hardwa

Eames DCW molded walnut plywood chair designed for the Herman Miller company with 5-2-5 screw configuration and Herman Miller/ Evans Products paper label dating it to 1946-1947. Original finish with e

Herman Miller Mid Century Modern Early Eames DCW Lounge / Dining Chair Birch Molded Plywood for Herman Miller Evans Products Lounge Chair Circa 1940's 28.5" H 19.5" W 21" L Condition Consistent with A

Charles and Ray Eames (American, 1907-1978 | 1912-1988) Evans Products/Herman Miller, c. 1945 pair of early DCW chairs walnut plywood, rubber applied manufacturer's paper label to underside Height 29

Charles & Ray Eames Exceptional early 'DCW' chair, 1946-47 Walnut, rubber. Manufactured by Evans Products for Herman Miller, USA. Underside with 'Evans paper label'. 29" W x 19.5" W x 19" D

Set 4 DCW Chairs by Charles Eames. Manufactured by Evans products company for Herman Miller. Dimensions: Height: 29.75 inches, Width: 19.25 inches, Depth: 20.5 inches. - Seat Height: 18 inches --- - -

CHARLES + RAY EAMESPair of 'DCW' chairs, 1950sBirch, rubber. Manufactured by Evans Products for Herman Miller, USA.One with original Evan decl underneath. Each: 29.25" H x 19.5" W x 20.5" DSeat height

Dining chairs, pair Herman Miller, 1952. Molded ash, upholstery. Size 20w x 21d x 29h.

Set of six authentic molsws plywood chairs in three different colors. All manufactured by Herman Miller. Chairs were purchased between 2007-2010 and have original paperwork. Chairs retail for $1100 ea

Charles Eames (American, 1907-1978) and Ray Eames (American, 1912-1988) for Herman Miller, United States. DCW chair, designed 1945. Molded plywood and rubber, decorated with painting reminiscent of in

Charles Eames (1907-1978) & Ray Eames (1912-1988) for Herman Miller DCW chair Zeeland, Michigan, 1950s molded birch plywood, chromed steel, rubber foil label 19 1/2"w x 18"d x 29"h

Set of 6 clean yellow shell side chairs with aluminum leg bases. From a Long Island, NY estate. - Dimensions: 18" w x 19" d x 31.5" h

Charles and Ray Eames (American, 1907-1978; 1912-1988) for Herman Miller pair of DCW ebonized molded wood dining chairs, designed in 1946, maker's label underside. 28.5" H x 19.5" W x 21" D; seated: 1

Pair of Eames DCW (Dining Chair Wood) chairs, each bearing worn labels Charles Eames- Herman Miller. [29 1/4 x 19 1/2 x 20 1/2 inches; 17 to seat].

Eames Design for Herman Miller, DCW Dining Chair, molded ash plywood, rubber, 28.75 x 19.5 x 23 inches (73 x 49.5 x 58 cm), 5-2-4 screw pattern on base (see photo), unmarked.

Mid Century Modern Eames for Herman Miller DCW Side Chair, molded ash plywood, unmarked, 28.5 x 19.5 x 20.5 inches, second generation with 5-2-4 bolt pattern.

Charles and Ray Eames for Herman Miller Upholstered DCW Chair , 1950s, 5-2-4 screw pattern, h. 29 1/2 in., w. 20 in., d. 21 1/2 in