Early Eames "DCW" bent plywood chair (as seen - backrest drilled) 19 1/2" x 29" high

Early production DCM oak bent plywood side chair with factory black metal frame. Designed by Charles and Ray Eames. Manufactured by Herman Miller. Circa 1950. Dimensions: H 29" x W 19.5" x D 20.5" x S

All plywood. Stamped DCW. 29" h x 19 3/8" w x 22" d. Seat height 18".

A Charles and Ray Eames DCM bent plywood chair. Manufactured by Evan Products Company Molded Plywood Division and distributed by Herman Miller. With label on back. 29 1/2"h x 19 1/8"w x 20 1/2"d. Cond

Charles & Ray Eames Exceptional early 'DCW' chair, 1946-47 Walnut, rubber. Manufactured by Evans Products for Herman Miller, USA. Underside with 'Evans paper label'. 29" W x 19.5" W x 19" D

Charles and Ray Eames for Herman Miller bent plywood DCW chair. Stamped DCW on underside. 28-3/4 in tall x 19-1/2 in wide x 21 in deep.

Pair of Charles Eames for Herman Miller molded plywood side chairs, labels on bottom of seats, 29 1/2" high x 19 1/2" x 20"

Eames Design for Herman Miller, DCW Dining Chair, molded ash plywood, rubber, 28.75 x 19.5 x 23 inches (73 x 49.5 x 58 cm), 5-2-4 screw pattern on base (see photo), unmarked.

Marked DCW underneath. Dimensions: H 29" x W 20" x D 20" x SH 18.5" Condition: Wear to rubber bumpers. Soiling to plywood finish. Wear consistent with age and use. Few veneer cracks.

Charles Eames (1907-1978) & Ray Eames (1912-1988) for Herman Miller early DCW Zeeland, Michigan, 1950s molded rosewood plywood, chromed steel Evans / Herman Miller label 19"w x 16"d x 29"h

Eames for Herman Miller DCW side chair, ebonized molded plywood, 29"h x 27"w x 19"d, light wear to finish, chip in front of seat

Eames, Charles & Ray (American, 20th c.) for Evans Products, DCW Lounge Chair, mid 20th century, plywood (walnut), rubber, steel, Evans label to underside, 29 x 19.5 x 20.5 inches

Ebonized molded plywood, unmarked Dimensions: H 29.25" x W 19.25" x D 21.5" Condition: some light wear around edges, shock mounts need to be re-glued, chair seat is currently loose

Charles Eames (1907-1978) & Ray Eames (1912-1988) for Herman Miller DCW chair Zeeland, Michigan, 1950s molded birch plywood, chromed steel, rubber foil label 19 1/2"w x 18"d x 29"h

Five chairs: three DCM, one DCW, one Eiffel Tower, Zeeland, MI, 1950s; Walnut, ash plywood, reinforced fiberglass and upholstery, enameled steel; Foil labels to DCM, DCW stamped; DCW: 29" x 19 1/2" x

Charles Eames (1907–1978) & Ray Eames (1912–1988) for Herman Miller DCW dining chair, four Zeeland, Michigan, 1950s birch plywood, ebonized plywood, rubber 19 1/2"w x 21"d x 29"h

CHARLES EAMES FOR HERMAN MILLER PLYWOOD DCW CHAIRS, SIX, H 29" W 22" D 20" Eames DCW chairs. Abbreviated for the Dining (D) Chair (C) with Wood legs(W). Provenance: Property of a Grass Lake, MI privat

Exceptional and rare set of (6) bent plywood DCW chairs in ebonized finish, designed by Charles & Ray Eames for Herman Miller and produced by Evans Products, c. 1947-1950. Five of the six chairs with

An early 1st Production table and chair set by Warren Platner for Knoll. 320 Park Ave address on labels. Hand welds. Table - 28 x 54 / Chair - 29 x 27.5 x 19 . All measurements are in inches.

# 5761. Walnut frames. Upholstered. Chair measures 40" h x 29 1/4" w x 35 3/4" d. Seat height 19 1/4". Ottoman measures 12 1/4" h x 23" w x 18" d.

EERO SAARINENEarly 'Womb' chair and ottoman, 1950sFVintage deadstock Knoll fabric, moulded plywood, painted steel. Manufactured by Knoll, USA.Ottoman's frame impressed "12."35.5" H x 40" W x 33" DSeat

All Blue signed and dated 1992 (verso) acrylic on marine plywood 29" x 19" (74 cm x 48 cm) PROVENANCE: A gift from the artist to the present owner As per Lee Aguinaldo, color possesses a radiant prese

Leah Wingfield (American), Bent Notes, 2004. 19.5 x 12 x 5?. This cast glass sculpture is based on the blues and offers a soulful experience in form and color. It is part of a rare series that the art

Joseph Floch (1894-1977) Portrait of a Young Boy Signed lower right Oil on canvas 23 ½ x 19 inches Framed: 29 x 25 inches Provenance: Peretz Hirschbein (acquired in Berlin in the 1920’s) By descent

Robert Longhurst (American, b. 1949) abstract wood sculpture titled "Wisp," likely carved from bubinga wood and mounted onto a square wood base. Base with artist/gallery card. 29" H x 19" W x 12" D. P