Vintage Harmony Steel Reinforced neck acoustic guitar

Vintage Stella Harmony Acoustic Guitar. Steel Reinforced Neck. The pick guard has a crack and some damage. There is a separation on the guitar casing. The Guitar is worn and shows some scratches. Made

Harmony steel reinforced neck acoustic guitar. Imperfections. Includes Case. Length: 40"; Width: 15" (Music, stringed instrument) STERLING ASSOCIATES STRIVES TO PROVIDE ACCURATE, OBJECTIVE, & FAIR INF

Steel Reinforced Neck. Made in USA. Needs dirt and masking tape removed to be refinished. Has a quarter size round hole on the bottom near strap nut. We did not test any of the amps, guitars or audio

Lot of two vintage acoustics - meidum size. Kingston has a steel reinforced neck in overall good condition, needs a few strings. The cherry wood guitar is really unique, seems older and is not marked.

A vintage Hohner hollow body acoustic guitar. The corps is made of wood adorned with overlay. Steel reinforced neck. Marked with a brand logo on the top of the neck. Circa: 1960s to 1970s. Marked with

Steel reinforced neck36"L

Acoustic guitar, possibly vintage. Two strings broken, saddle needs replacing. Label in sound hole reads as MG Japan, label on neck reads as STEEL REINFORCED NECK. Wear is consistent with age and use.

Made in USA Neck Steel Reinforced Crack on front covered with tape. small hole in body see photo.

Made in USA Neck Steel Reinforced Crack on front covered with tape. small hole in body see photo.

Two vintage acoustic 6 string guitars in natural finish. One is marked Kent, the other has a steel reinforced neck. With a case. Circa the late 20th century. Vintage Guitars And Music Instruments For

16" Fret Board, 18" Body, Overall Length 39"

Vintage 1960s Stella Flat Top S-61-HB Guitar With "Steel Reinforced Neck"serial number 1943H928, wood stained with a subtle lime-tinted finish featuring faux maple wood grain throughout, trapeze tailp

Serial X25xxxMade by Valco in Chicago in 1953Laminated maple back and figurated maple sides, solid spruce top, single binding top and back.Neck is probably maple and probably steel reinforced, rosewoo

Circa 1945 Model H1088 Gene Autry. Original vintage painted wood finish. Acoustic six string. Dot inlay running down the neck. Original hardware. Overall good vintage condition. No major damage or pre

Vintage Harmony Acoustic Guitar W Case. Guitar measures 40 inches x 15 inches.

HARMONY ACOUSTIC GUITAR VINTAGE SIZE: 41" X 16" X 3.5" TERMS: Please Read Carefully. Pick-Up will be 1 WEEK ONLY. June 20th through June 24th. Hartzell’s Auction Gallery will Handle All Shipping

Approx .15" x 40 1/4" long. Has crack and damage as shown . Case is damaged

Japanese Steel Reinforced Acoustic Guitar, 39"L (with accessories).

Looks like it says 91 on label. Approx. 13 1/4" wide and 37 3/4" long. Back has rippling.

Vintage Stella Harmony Acoustic Guitar M-69-S. Measurements in inches: 40 long Condition:Has wear and scratches, hole drilled in back . Missing two bridge pegs Shipping:We offer in-house shipping. Ite

DESCRIPTION: Vintage acoustic guitar by Harmony featuring six strings, a hollow body, and fret markers at the 5th, 7th, 9th, and 12th frets. Emblazoned on the headstock with Harmony logo and "MADE IN

Vintage Harmony H6128 Stella Acoustic Short Scale Guitar. 36" L x 13 1/2" W x 4" D. Serial #4777HG128. Harmony was one of the largest musical instrument manufacturers in the USA. Operating from 1892-1

VINTAGE HARMONY MOD H1215 ARCH-TOP ACOUSTIC GUITAR, 1965 WITH BAG

Vintage 1960s Harmony Arch Top Acoustic Guitar, Sunburst Finish. Bridge Has Been Replaced. Hole Drilled In Headstock To Hang On Wall.