A bronze sword of the Hemigkofen type, Urnfield period (Hallstatt A), 12th - 11th century B.C.Curved blade with maximum diameter in the front third, which made the piece particularly suitable for cutting use. Distinctive midrib that continues into the handle area. This is bordered by a scoring line that runs parallel to the cutting edge at a distance of approx. 8 mm. Along the tip, the cutting edge, which is approximately 2 mm wide, is separated from the thicker middle part.Trapezoidal handle plate, separated from the cutting edge at the bottom by a distinctive indentation. Above this there is a bulbous handle tongue with three rivet holes, which clearly flares out to the side at the upper ends. There are three rivet holes on the handle plate on the left and right along the top edge. The handle plate and handle tongue are bordered by an 8 mm wide edge strip, which, together with the rivet holes, was used to hold handle scales made of organic material. Length 64.7 cm. Maximum width at the handle plate 6 cm. Surface with minimal corrosion scars. Minimal chipping on the cutting edges. The surface is covered with a typical reddish-brown "moor patina", which suggests that it was once dumped in a moist environment. Excellently preserved, attractive bronze sword.Provenance: From an old Belgian private collection, acquired in the Belgian art trade in the 80s.Condition: I -