Gemini GT-10 FLOWN Heat Shield Plug

A fragment of Heat Shield that was flown in space during the Gemini 11 mission. The heat shield protected the two-man Gemini spacecraft crewmembers Pete Conrad and Dick Gordon, accomplished a rendezvo

This Flown Space Shuttle Solid Rocket Booster Sleeve Heat Shield Made by Thiakol Co The item is 10" tallAll items from the Estate of Charlie Bell space auction in May of 2000

A vintage NASA Lucite containing a section of Flown Ablative Heat Shield from an unknown Mercury Spacecraft flight. This would have been affixed to a wooden plaque with the mission information printed

PLEASE NOTE : In accordance with the controlled regulations through ITAR, Heat Shield Thermal Tile can only be sold to United States residents residing in the USA. This is a large section of Flown Hea

Apollo 13 flown heat shield fragments of the Command Module #109 of AS-508; with Certificate of Authenticity from Ken L. Havekotte

A vintage and original Project Gemini Spacecraft Pre Launch Test Procedure for Rendezvous Mission Countdown, GT-10 and up. This document dated July 14, 1966 is 17 pages and is held together with a pap

A nice sized section of Thermal Protection Tile Flown on the Space Shuttle Columbia. This tile measures about 2" x 1 1/4" x1 1/5". It has been mounted to a plexiglass base measuring 3 1/4" x 4 1/4". I

NASA Flown Apollo Heat Shield Piece is 5" x 5" x 2 1/2" All items from this Auction came from the estate of Charles Bell in 2000 All items Located in in Hollywood Florida Warehouse For Shipping Call t

THE BRUNSWICK BALKE COLLENDER CO. - WITH TIN HEAT SHIELD - 10 1/2" UPDATED 2023 TERMS FOR PURCHASING AND SHIPPING OF AUCTION ITEMS. PLEASE READ CAREFULLY BEFORE BIDDING. ALL PAYMENTS FOR PURCHASES WIL

Flown Nasa Apollo Mission Space Craft Insulation Heat Shield Part # 8-030704-1 apox 2 feet by 4" wide. All items from the Estate of Charlie Bell space auction in May of 2000

ONE HAS TIN HEAT SHIELD DIMENSIONS:5" TO 10 1/4" L TERMS:Hartzell's Auction Gallery will handle most of the shipping in-house. WE do reserve the right to not ship some large items, larger lots of glas

Apollo 13 Flown Kapton Foil Fragments. There are two sections of Kapton Heat Shield Insulation that was part of the Apollo 13 Command Module "Odyssey" and was flown around the Moon on the Apollo 13 mi

This Is a Flown Nasa Space Shuttle Solid Rocket Booster Insulation Heat Shield Part # 10754-0001-102Piece is 9" by 6" All items from the Estate of Charlie Bell space auction in May of 2000

Three (3) “GT-7/6” and three (3) “GT-10” gold-plated medals, produced by Spacecraft Medals Inc. Proof condition.

GT-10 Medal. Collins, Young, July 18, 1966. Project Gemini.

Always Dependable Blue Crown Husky Spark Plugs Controlled Heat Zone Engineered for High Compression Engines. T6 10mm Thread. Box measures approx 5.25" x 3.25" x 2". Includes 10 spark plugs in boxes.

This Is A Flown Space Shuttle Orbiter Heat Insulation BlockMade By Hi Temp Insulation Inc.Piece Is 15" by 10"

Commemorative Apollo 8 charred heat-shield Ablator, preserved in resin, 8"h x 5"w, Provenance: The collection of Ray F. Larson, Vice-President and Chief Engineer of Rockwell International

Set of 10 Shield Back Dining Chairs, to include 2 arm chairs and 8 side chairs having upholstered back and seats with leather on backs, arm chair height 39 inches, width 23 inches.

Gas Revolving Iron and Polisher with Brass Heat Shield. Size 5 3/4" x 5"

Drop in the Back Slug Iron with Stirrup Posts and Turned Screw. Elevated Heat Shield. Extended Sole. Lift Gate. Size 4 1/2" x 6 3/4"

Measuring Bridge by Siemens & Halske, c. 1890 Thomson measuring bridge with sliding wire, for resistance measurement from 0,1 to 0,000001 ohms, upper part with circular plug rheostat, with 10 plugs an

CLEAR MICA PORT UNDER HEAT SHIELD - MILWAUKEE, WISCONSIN PLEASE READ CAREFULLY - Terms for Purchasing and Shipping of Auction Items. Please read carefully before bidding. All payments for purchases wi

REVERSIBLE NATURAL GAS - TWO FLAT WORKING SURFACES AND A HEAT SHIELD - CIRCA 1900-1910 11" X 6"