Early Working Model of a Steam Engine

4 Working Models of Early Steam Engines 1) "Charlotte", T.V. Wild, 1990, model of 1862 vertical-column steam engine by Williamson Brothers of Kendal, height 6 in. - 2) Model of a single-cylinder beam

Steal, copper, aluminum and wood. signed. 4 1/2 x 10 x 5 inches. Note: Arnold Edmund Thompson (1931-2010) Marblehead, MA. In the early 1950's during his USAF tour he perfected his plane models. He bec

20"x42"x24" working model steam engine, has been sitting in a museum, has not been run in years, WOW! - - -BUYER TO ARRANGE SHIPPING

Model Steam Engine was built in 1937 by Roy Andrew Evans while sailing aboard the "Henry H. Rogers", locals have even seen this run.

A miniature brass early model steam engine, 5"h x 2.75"w.

Including: 1906 French Bond for Mille Piastres; 1903 British Cardboard Working Models of Steam Engines, in box; (2) Boxed Sets 1952 Audubon Bird & Flower litho cards, postcard sized but with scientifi

Working Model of a Steam Engine with Water Pump, c. 1980 Based on an English machine from the 19th century, approx. 1-inch scale, cast metal, steel and brass, wood-planked double-acting cylinder, Ø

An early 20th century model steam engine marked Weeden, trade mark, reg. U.S. patent office. 10 inches high x 10 x 5. (missing burner horizontal). As shown.  Items are sold as is. Please inquire abou

Dimensions: (Model) H 14" x W 10.5" x D 11.25" (Box) H 10" x W 14" x D 11.5" Condition: Flywheel turns and mechanism moves; model not tested further. Wear consistent with age and use including tarnish

2 Steam Engine Working Models, c. 1970 Brass, cast metal and steel. 1) Horizontal single-cylinder steam engine, partially finished in brown, 1 3/4-inch mahogany-lagged brass-bound double-action cylind

2 Steam Engine Working Models, c. 1970 Brass, cast metal and steel. 1) Horizontal single-cylinder steam engine, partially finished in green, 1 3/4-inch lagged brass-bound mahogany double-action cylind

A Painted Metal Tangye Horizontal Steam Engine Model Early 20th Century Length 18 1/2 inches.  Property from the Estate of Peter F. Stone, Buchanan, Michigan

An early 20th century Weeden model steam engine. 16 inches high x 10 x 7. As shown.  Items are sold as is. Please inquire about condition if not otherwise stated.

Grouping of child's toys including: A tin German steam engine working model with original instructions (written in German) - minor surface rust and in good condition - 8"W x 5 3/4"D x 8 1/2"H; a Calif

Two early 20th century Weeden model steam engines (one missing water gauge). largest measuring 9 inches high x 9 x 6. As shown.  Items are sold as is. Please inquire about condition if not otherwise

Miniature Working Model of a Walking Beam Steam Engine, c. 1850 Marked "W & S Jones, 30 Holborn, London", all-brass machine parts, Watt-type 6-column low-pressure balancing steam engine, vertical cyli

Working Model of an Oscillating Single-Cylinder Steam Engine Polished-steel, cast-iron and brass construction, cylinder with vertical piston rod, reversible, with eccentric and counter eccentric cylin

Working Model of a Walking Beam Steam Engine, c. 1990 Polished-steel, brass, bronze and cast-metal machine parts, Watt-type 4-column low-pressure balancing steam engine, vertical cylinder, governor, f

Working Model of a Single-Cylinder Overcrank Steam Engine Wolfgang Neubauer, Paderborn, Germany. Polished steel, cast iron and brass, cylinder with vertical piston rod, crosshead guide power transmiss

An early 20th century engineers model vertical steam engine, of brass, iron and steel construction, the double frame with top mounted cylinder and mounted to a cast iron base

1-Inch Scale Working Model of a Horizontal Single-Cylinder Steam Engine, 1960 England, polished-steel, cast-iron and brass construction, partially green-lacquered, brass-bound mahogany-lagged cylinder

Working Model of a Single-Cylinder Overcrank Steam Engine, c. 1980 W. Boothby, England. Polished-steel, cast-metal and brass construction, cylinder with vertical piston rod, eccentric rod slide valve

c. 1904, built as a steam accessory for one of Doll's many working steam engine models. This delicate example is entirely original, with no repairs or repainting. Include

Working Model of a Napier Four-Pillar Table Steam Engine, 1983 Extremely detailed 1-inch scale engineering model of the single-cylinder table engine from 1843 by R. Napier, Glasgow, brass, steel and m