Large Ernst Plank Stationary Steam Engine

Vintage Ernst Plank toy stationary steam engine, Hercules. Manufactured by Ernst Plank Co of Nuremburg Germany in the early 20th century. Small metal plates read, E.P and Hercules. Pressed metal toy o

Large Stationary Steam Engine by Doll, c. 1935 Nuremberg, no. 520/4, fixed cylinder, length of the boiler 12 ¼ in., Ø 4 in., boiler support, 2 boiler galleries with stairs and railings, two

Large stationary steam engine model hand built and mounted into a wood box display. Apparently unmarked. Approximate height 9.5", width 15.6", depth 9".

Ernst Plank steam engine with separate four-wheel transmission, both retaining original maker's plate and are mounted on wood bases, engine outfitted with a governor, 10'' h., 7'' w.

ERNST PLANK steam engine with ferris wheel, around 1900, drive model, mounted on a wooden board, board 39 x 14 cm, used, scratches on the paintwork, without burner German Description ERNST PLANK Dampf

steam powered flywheel with governor on wood base in original box with colorful paper label; housing retains makers' brass plaque engine on base 5.25" w. x 8.5" t. x 5" d.

Has good color, shows wear and paint loss throughout, dual chamber, top pipe has been resoldered, displays well, marked D.R.G.M. 193033, 14x9.75x10.75", rated 7.75

Ernst Plank Cosmos steam engine, in its original box, 13'' h., 4 1/2'' w.

Earl example with fancy tile floor mounted to 16.5 X 7.5” wood base. Includes burner, dynamo with switch & night. Base shows some staining in center, otherwise presents well. Very Good.

Circa 1910 Ernst Plank Vertical Steam Engine. All original with EP nameplate. Comes with Wilesco Machine Shop Accessory that has hammer, grinder, and saw. Steam Engine measures 11" Tall. Very Good-Exc

All original. Wheel has breaks. 14" Very Good

Very hard to find early 20th century Ernst Plank electric steam engine. All tin construction with 7" by 7" base. 11" tall to top of chimney. Has general wear, and some dings to boiler. Includes origin

4 Toy Steam Engines 1) Ernst Plank, horizontal steam engine with dynamo, boiler heavily modified, with additional manual feed pump, converted to gas heating, without chimney, dimensions of the basepla

276. ERNST PLANK PUPPET VALVE STEAM ENGINE | Circa 1895. | 13" h. x 12" l. | Stack and tin base holding flywheel is repainted, otherwise in All Original Condition. | $300 - $600

ERNST PLANK EXCELSIOR, standing steam engine, 35 cm, base casting, handpainted, brass boiler, burnished, with feed pump, burner, manometer, glass is cracked, water level glass, whistle, funnel, optica

C. 1902 Scale Model of Steam Engine by Ernst Plank of Nuremberg. 4.5"W x 6"Deep x 13"H

1041. ERNST PLANK HERCULES STEAM PLANT | Desirable engine, small scale. | 12" h. | (Excellent to Pristine Condition) | $600 - $900

Including; Weeden 110 volts upright steam engine and ERNST PLANK "Noris" 1903 standing steam engine. Measuring approx. 11 1/4" to 13 1/2" tall. In age appropriate condition, see photos.

Including; Weeden 110 volts upright steam engine and ERNST PLANK "Noris" 1903 standing steam engine. Measuring approx. 11 1/4" to 13 1/2" tall. In age appropriate condition, see photos.

Large Working Model of a Stationary Twin-Cylinder Undertype Steam Engine, c. 1975 Extremely detailed model, brass, steel and cast-iron parts, partly finished in green, coal-fired, soldered brass flame

Includes European-style engine in green with burner on bottom, "EP" plate on backside of engine and with matching green four-wheel tender. There is one green passenger car labeled "I" and "II" with op

American. 1900s. Cast iron, brass, copper. Used as a salesman sample. Maker unknown. 8.5" x 10" x 6".

A MODEL VERTICAL OVERHEAD CRANK STATIONARY STEAM ENGINE, 20TH CENTURY, the heavily cast and machined 6-spoke flywheel fitted to one end of the overhead crankshaft, supported by a pierced cast plate an

Stationary Steam Engine by Doll, c. 1927 Nuremberg, no. 510/3, fixed cylinder, length of the boiler 11 in., Ø 3 1/2 in., 2 boiler galleries with railings, with water level gauge, safety valve, st