18 Drawer Parts Cabinet

34" wide X 12" deep X 10-1/2" high. Some rust. LR IMPORTANT: Before bidding, please read the terms and conditions. When you registered for the auction you agreed to these terms and will be required to

Approx. 12" x 34" x 13" tall.

Approx. 17" x 34" x 13 1/2". Has slight crease on upper left top.

Approx. 12" x 34" x 14" tall. Handles are off and falling off.

Approx. 12" x 34" x 13" tall.

The Drill Press and 18 Drawer parts cabinet are NOT included in this lot. Must take all other items on top of table. No shipping and pick up before Noon !

SET OF 3 STEEL CABINETS W/ 18 DRAWERS ASST. WATCH PARTS, 19/20TH C. EACH CABINET: H. 9", W. 17" D. 16"

Is originally out of the Waynesburg Carriage Co. in Waynesburg Ohio. 80 drawers on top rotating part and 18 drawers on the bottom, all drawers are with wooden knobs and a few drawers are missing label

Circa 1900 General Store Rotary Bolt & Screw Cabinet with 98 drawers. 80 drawers in upper part and 18 drawers in the base. Good working condition. Hgt 61" width 30" d 30" . Found in St Paul MN large V

French Regency mahogany two part cabinet, bookshelf top with drawer on gilt bronze mounted columns, set on base with one drawer and one door. height 73 inches, width 34 inches, depth 18 inches *No c

Arcade / Pinball Board Repair Parts Cabinets. Varying parts, not all drawers are full. In-house shipping available. Dimensions of One: 18 x 14 x 6

with three columns of twelve drawers, most with original turned wood pulls in old original red wash with printed and painted labels on front, 18 x 7 x 25" high. Every drawer is full of watch crystals,

Large Standing 18-Drawer Wood Machinist Printer's Chest. This solid freestanding 4-ft high industrial unit was probably a machinist's chest of drawers for small tools, dies, and parts, but also resemb

EUROPEAN OAK TWO PART CABINET HAVING BARLEY TWIST COLUMNS, TWO HINGED SWINGING DOORS, SEPARATED BY ONE RECTANGULAR DRAWER ON BUN FEET; 75"H X 32"W X 18.5"D

Early (2) part Continental cabinet. Top has (2) doors with interior drawers, base with single drawer over single door. 24" x 18 1/2" x 57" Ht.. Dated 1690 on top door.

TWO PIECE PRIMITIVE PINE CABINET, TWO DOOR UPPER, TWO DOOR TWO DRAWER LOWER. CONDITION IS CONSISTENT WITH AGE. 45" W x 18" D x 75" H. THIS ITEM EXCEEDS SIZE LIMITATIONS FOR IN HOUSE SHIPPING.

TWO PART, BURLED ROCOCO STYLE CHINA CABINET. SINGLE MIRRORED DOOR UPPER, SINGLE DRAWER TWO DOOR LOWER. TWO INTERIOR DRAWERS. CHIP TO MOULDING ON RIGHT SIDE, AGE SPLITS. 42" W x 18" D x 88" H. THIS ITE

A Japanese two part tansu cabinet with sliding doors and drawers. 61 in tall x 36 in wide x 18 in deep.

CHINESE 2 PART INLAID CABINET- 2 MIRRORED DOORS OVER 2 DRAWERS OVER 2 DOORS 68 1/2"H X 40 1/2"W X 18 1/2"D

Well designed blonde modular example in (2) parts including a (2) drawer cabinet which rests on a bench with splayed legs. 31 x 60 x 18 inches. (overall). Provenance: Nephew of Paul McCobb.

Japanese style cabinet in four parts, the top with a drawer having an inset woven panel, above four additional drawers, rising on a stand, continuing to the lower tier, 49.5"h x 48"w x 18"d

A Merton Gershun for American Martinsville three-part modular cabinet featuring a fall-front desk with drawers and bar cabinet resting on a three-drawer bench table. 47in tall x 72in wide x 18-1/2in d

Mahogany Stained Jewelry Chest together with a two drawer file cabinet; used condition, wear/worn, scratches, jewelry cabinet missing part of back, jewelry chest measures 42 1/2" tall x 18" wide x 15"

Pr Herman Miller Wall Cabinets. These were part of wall shelf unit. Aluminum pulls. 1) 5 drawers. 2) 2 drawers. Metal Herman Miller tag. -- Dimensions: H: 14 inches: W: 32 inches: D: 18.5 inches ---