Air Powered Locomotive Train Bell Bronze [170392]

This bronze bell is air-powered (pneumatic) for locomotive use. It measures 9 in. high and 12 in. in diameter with a piston driven clapper. No maker identification. Compressed air moves the clapper at

Compressed Air Powered, Working Condition when hook up to compressed air. 12.5 x 23.5 inches, stamped 280574 .

Brass Air Powered Diesel Locomotive Bell - 12 3/4" diameter Bell is equipped with a Graham White double acting ringer. Bell shows minor dents and wear at the edge, but no major damage. The mount appea

Bronze diesel train locomotive bell, marked "EMD" and "8004150" height 17 in. x width 11 in. x depth 11 in. Provenance: a Rockport, Texas collection Condition: Missing clapper We happily provide

circa 1900 or earlier. bell is now air powered and functioning. easily attaches to an air compressor. H20" W23"

Railroad bell is air powered. Bell is approx 12" in diameter and 10 3/4" tall. It is mounted on a rolling stand. No shipping.

A 16" cast bronze steam locomotive bell mounted in a very heavy cast iron yoke with a hex nut finial. There appears to be provisions for an air ringer on the lever side. Clapper is intact. Bell shows

Train steam generated bronze bell. Marked "Graham White" on the clapper. Marked "8004156" on the crown 12 " diameter. 16" height including bracket.

Brass and Cast Iron Steam Locomotive Train Bell Having a brass bell mounted into a cast iron frame Height: 28.00 inches, Width: 23.50 inches, Depth: 15.50 inches Category: Collectibles > Transportatio

Brass steam locomotive train engine bell, 17"d, with cast iron angle type mounting bracket for mounting on front of smoke box, stamped #208 on top of bell

Cast metal Nathan Air Chime train engine horn. Has two number 1L and one number 3 trumpets. Not complete. Not tested, has been painted in black paint which is flaking off in some spots. Largest trumpe

Micro Air Powered Model Trains and Table Custom made scenic air table having micro wooden trains which run on air powered tracks, covered by an acrylic box, air compressor Property from: a Private Col

Leslie Supertyfon S-3K Locomotive / Train Horn. Bell numbers include 31, 37, and 48. 6501A manifold. Horn appears unrestored and is visually in good condition. See photos for best description.

Leslie Supertyfon S-3K Locomotive / Train Horn Bell numbers include 31, 37, and 48. 6501A manifold. The horns appear to have an older restoration and some light paint flaking inside the large bell. Ho

HO Scale G.S.B. Rail Chessie System SD40-2 Powered Diesel Locomotive Train B&O, Winston Salem HO Model Train 1504, Baltimore & Ohio Boxcar Model Train, HO Model Power # 921h Dupont 40' Chemical Tank,

Athearn 42005 HO Scale Powered Locomotive Drive Train Santa Fe, Athearn Blue Box Union Pacific 55ft Center Flow Hopper, Athearn HO Rio Grande F7 Powered Locomotive.

A 19th century Bronze Locomotive Bell with Cast Iron base and frame. Stamped marks on Bell include "1883,1888, 1898" and others, frame is cast #80140. Old painted finish with wear. 14 1/2" diameter be

A Bronze Locomotive Bell united states, circa 1900 15" W x 12.5" D x 18.5" H Estimate $600-800

A Bronze Locomotive Bell united states, circa 1900 15" W x 12" D x 18" H Estimate $500-700

EMD locomotive bronze bell, 8004158, smooth surface, clapper marked BR-83 Viloco Chicago, 12" at base, bell weights 20 lbs plus clapper weight 3.2 lbs. Good condition.

Large Train Bell. Marked 8044623 REVA, EMD 8004156. Approximately 14 in. X 12 in.

Lionel 2240P Wabash F-3 Powered A Unit. 6-14582. New in original Box.

A bronze locomotive bell from Boston & Maine Railroad #2658. This bell was sold by the Boston & Maine in 19xx. We have the original B&M reclamation tag sting the weight of 242 pounds and the original

Signed 'Prime-Wilw.' and 'BR10.90' on the clapper. Mount marked '8044623 REV along with conjoined HF monogram. Measures 11.5 in height with a 11.75 circumference of bottom rim of bell. We happily prov