American Nuts and Bolts Cabinet

American Antique octagonal hardware store 72-drawer nuts and bolts revolving cabinet circa 1880 pine, porcelain 22 1/4"w x 21 7/8"d x 32 3/4"h

General Store Octagonal Nuts & Bolts Cabinet. Dimensions 27x20

Dennis Aarons, American, Nuts Bolts Hardware Sculpture of a Band. titled "Our House is Your House, No Objection", with Artist's Label on base bottom. size: 8h 8w

Hardware store revolving nut & bolt cabinet, oak octagon-shape, 80 pie-shaped drawers w/orig porcelain knobs & deeply pressed lettering, c.1890, Exc cond, 36"H x 21.5"Dia.

This is a beautiful old early hardware cabinet, possibly an older restoration. A rare version of your typical nut and bolt cabinet with a super early look. It has a swivel base and swivel octagon top

Hardware Store Revolving Nut & Bolt Cabinet, pine 120 drawer octagonal shape, Good+ cond w/remnants of orig stenciling, 52.5"H x 22"W.

Carpenter made with six columns of nine open shelves, circa 1920 in white pine wit nice dark patina, 15” diameter x 67” high. Condition leans a bit, else Fine.

Nuts and bolts cabinet; Glue, varnish, brush D. Birnberg; Tool box and Jar box - AU

Good used condition 37" Tall x 23" Deep x 23" Wide made by A. R. Brown, Erwin, Tennessee 40 drawers patent date 1901

1940s, each unit has 35 drawers, 13 tall x 22 wide x 6 deep

2 nut and bolt cabinets with bins: as seen in photos

Left shelving corner of Shed: Nuts, bolts, nails, cabinet and oils as seen in photos.

An antique hardware store revolving nuts and bolts parts cabinet with an octagonal top, each side with ten numbered drawers on a square base with twelve drawers on two sides. White ceramic pulls. On c

Hardware Store Display Cabinet, probably American Bolt and Screw Company, Dayton, Ohio, c. 1900. The upper case, which can be mounted to rotate, with ten stacked wedge-shaped drawers on each octagonal

72 DRAWER HARDWARE STORE COUNTER TOP PARTS CABINET, OR NUTS AND BOLTS, MISSING REVOLVING BASE, ALL DRAWERS AND KNOBS INTACT, STILL CAN SEE SOME OF THE OLD STENCILING & DECALS ON SOME OF THE DRAWERS, F

(lot of 2) Sandra Frank (American, 20th century), New Jersey and Nut and Bolt, charcoal on paper, each signed lower right, each overall (with frame): 20.75"h x 17.45"w

Has original stenciling, reading "A&W Co. Choice Pressed Herbs." Doors have labels, including "Dye", "Nuts & Bolts", "Rubber Bands", "Awnings Screens", "Jacks", "Nails", etc. CONDITION: In original co

Brother Melvin MeyerAmerican, (1928-2013)Untitledsheet metal, and metal nuts and boltswall plaque, mounted on a wooden frame.21 x 19 inches

A metal parts cabinet that measures about 15" x 10" x 6". It has plastic drawers with various hobby parts: cut off disks, lubricants, small nuts/bolts, other various parts, 4 smaller top drawers are e

NUTS, BOLTS, HARDWARE, SWITCH PLATES, AND MORE - SCRAP DISCLAIMER: Pick up DATE: Saturday, July 17 from 10am to 2pm at the address of 161 Raritan River Rd, Califon, NJ

Complete contents of work bench in drawers and cabinets: Vintage auto tools and parts; nuts/ bolts and screws; auto advertising cans; auto tail lights; Solder wire and Soldering irons; Vintage pencil

Fourth quarter 19th century, pine. Two board top, canted legs with stretcher, center foot rest, wire nail and nuts and bolts construction. Edge wear and water stains on bottoms of legs. 29.75"h. 91.25

Miscellaneous Lot of Magic Props. American and Imported, ca. 1950s 2000s. Approximately 30 pieces, including Card Duck; Ball Vase (German); Hot Plate; Full Circle; Money Maker; Nut and Bolt Briefcase;

Milton Hammer, American (d. 2017) cartoonist and illustrator. (1) Target Toons by Milt Hammer original comic page. Target #12, 3rd Cover, 1947. 22h x 15w inches. (2) Blue Bolts & Nuts by Milt Hammer o