Atwater Kent Breadboard Radio Model 10C

The 10C was introduced in the mid 1920s, it employed two stages of RF amplification and was the first successful AK radio employing condenser tuning. In overall very good condition, all tubes and knob

5 tubes. 31" x 10"

Atwater Kent Bread Board Radio Model AK12 TA, 34" Long 7.25" Tall

DESCRIPTION: 1923 Atwater Kent Model 10A breadboard radio. MEASUREMENTS: 31" wide. CONDITION: Light overall wear as expected with age and use.

ATWATER KENT 'Breadboard' Radio circa 1923 model 10C, mahogany height 7 1/2in (19cm); width 31 1/2in (80cm); depth 10in (25.4cm) Footnotes: Provenance The Leonard Urlik Collection of Vintage Radios

Atwater Kent "Breadboard" Radio Receiver, 1922 Type 3, American 2-valve detector receiver (2 x UV-200), MW, battery, for loudspeaker, width 18 ½ in. Very good condition, original mounting. Radi

DESCRIPTION: 1924 Atwater Kent Model 10A receiver. MEASUREMENTS: 31-1/2" wide x 10" deep x 7-1/2" high. CONDITION: Light overall wear as expected with age and use.

Type Ta amplifier. 5 tube.

Atwater Kent Radio Model 812, nice original radio console right out of the original location, appears to be complete, but is untested due to wear on cords. No reason to believe that it would not work.

Atwater Kent Radio Model 60... 48" tall x 26" wide x 16 3/4" deep

Type TA. 2 tubes.

1931, Recapped Electronics, 7 tube Chassis. 19" tall x 16" wide x 10" deep

All tubes and knobs present. Very good condition.

1920's Atwater Kent Tube Radio Model 40 Condition:  Untested, would require an external speaker which is not included to be able to hear it

Vintage Atwater Kent Model 35 Tube Radio, measures 16" x 7" x 6". Needs to be rewired.

All tubes present. Very good condition.

This is an Atwater Kent antique tube radio and 15 1/2" speaker for local pick-up only. The radio weighs 34 lbs. (not counting speaker) so I am selling for pick up only at this point. The radio is mark

Atwater Kent Model 20 radio with Model H loudspeaker. Radio has 5 tubes present. Speaker has been tested using a modern audio amplifier connected to an 8 ohm to 600 ohm matching transformer; it works

Atwater Kent Receiving set Radio.Model 21 compact.

DESCRIPTION: Atwater Kent breadboard. Similar to Model 3945 with variometer and table mounted condenser added. MEASUREMENTS: 26-1/2" wide x 8" deep x 7-1/2" high. CONDITION: Light overall wear as expe

Atwater Kent Tube Radio with Speaker, Model 40. Type E Speaker. This item requires third party shipping or pickup arrangements to be made. Dimensions when stacked: 26 x 17 x 11

A rare early radio 5-tube set; tubes are absent. Included speaker is an Atwater Kent type M loudspeaker with a large, heavy steel horn. Speaker has been tested using a modern audio amplifier connected

Vintage Atwater Kent Floor Model Radio 39x15x25

1928 AC-powered metal case radio set made by Atwater Kent Radio of Philadelphia, PA, Model 42, s/n 2201460, with a Model E Speaker, s/n 953402. Tuned Radio Frequency (TRF) radio using a grid lead dete