Chapin Empty Compressed Air Sprayer

4 OMS OCEAN MANAGEMENT SYSTEMS STEEL FABER ITALY COMPRESSED AIR SCUBA TANKS-STAMPED ITALY30" OVERALL HEIGHT WITH VALVE-28" TO TOP OF TANK W OUT VALVE-7" DIAMETER-GOOD PRE OWNED CONDITION-DP11822

Germany, compressed air signal bell in green on brown platform. 6 1/2" h.

Case of 12 Cans of Dust Off Keyboard Compressed Air Dusters/Cleaners

Certificate No. 8 issued on April 24th, 1899 for 1 share at $100 to Walter S. Mallory. Mallory was a close associate of Edison's. The Edison Saunders Compressed Air Co. held patents to heat compressed

Stucco air sprayer

Tin and wire; has Bing label; advertisement reads: "Neuester Modell-Flugapparat 'Autoplan' mit Drukluft-Motor" (compressed air motor); wear; H-18", L-50"

1928 – 1929. Overall length is 28”. 7 ½” wide. Compressed air driven motor sails the boat through water. Total restoration. Painted in the salesman’s sample red color. Very professionally don

painted pressed steel, 28 in long, 10 1/2 in tall, 7 1/4 in wide, w/compressed air motor, on display board, orig box & insert minor wear, C9.

1929-1932. 24” L. With headlights, nickel plated bumper, bell on hood, search light mounted on cowl. Pump handle behind driver’s seat provides compressed air for squirting water. Professional rest

Highly ornate, almost Gothic, walking beam steam engine from EIWI. Model engine can run with compressed air. Beam moves freely and properly but was not tested with air. Based in Siedlce, Poland. EIWI

Compressed Air Powered, Working Condition when hook up to compressed air. 12.5 x 23.5 inches, stamped 280574 .

Cast iron base 23cm x 13.5cm, steam whistle, safety valve, water level indicator, oiler, water cock burner with 2 flames. Runs with compressed air. Condition: (Original). Dimensions: 10" x 5 - 1/4" x

Tin base 22.5cm x 22.5cm, manometer, water level indicator, steam whistle, original burner. Height 32cm, wheel diameter 6.5cm. Runs on compressed air. Condition: (Original). Dimensions: 8 - 3/4" x 8 -

Black wooden base 23cm x 26cm, steam whistle, centrifugal governor, safety valve, water level indicator, nickeled fire door with 3-wick burner. Runs with compressed air. Condition: Dimensions: 9" x 9

Steam whistle, weight safety valve, water level indicator, round burner, cast iron base diameter 12.5cm. Height 27cm, wheel diameter 8cm. Runs on compressed air. Condition: (Original). Dimensions: 5"

This bronze bell is air-powered (pneumatic) for locomotive use. It measures 9 in. high and 12 in. in diameter with a piston driven clapper. No maker identification. Compressed air moves the clapper at

Wooden base 16cm x 14cm, safety valve, oscillating cylinder, round burner. Height 18cm. Runs with compressed air. Condition: (Original). Dimensions: 5 - 1/2" x 6 - 1/4" x 7".

A Projection Microscope Intended for an Optical Bench, Early 20th Century. Having provisions for heating or cooling the specimen stage with compressed air or other gases. H:11 1/2 x W: 7 X D: 6 in. Pr

241. MARKLIN PNEUMATIC SWITCH TRACK | O gauge, lot of early sections of track, including two pieces of early pneumatic switch track activated by compressed air, pneumatic signal bell, and piece of tra

Approx 25 1/4" tall

Miscellaneous Railroad Pictures, sealed music album and air paint sprayer in C7 to C8 overall. Please review photos to verify condition and the contents of this Lot. This Lot is sold as is with no ret

Vintage Metal Chapin Bug Sprayer 17" Long

Lot of Tools, Air paint sprayers

all are composite, all are empty, the Air Speed is a modern can with paper label