Clockwork Speedboat model

An Orkin Craft scale model speed boat made by Calwis Industries Ltd. With clockwork motor. 22-1/2in long.

This boat model was thought to have been a factory-made display model for a Chris-Craft showroom. The quality of construction suggests that this could have been the case as the attention to detail and

BOUCHER STEAM-OPERATED SPEEDBOAT MODELSecond Quarter of the 20th CenturyWhite hull with aqua bottom, gunwale and cockpit. Steam engine. Displayed on a cradle.Height 11î. Length 37î. Width 9&

English. 1927. Painted wood. In box, with key, original literature and windscreen. Marked, "K" for Kellner sides of front. 4 x 26 x 4" (boat), 4 1/2 x 28 x 4 1/2" (box). Mechanically functioning. CODE

Vintage Carved Mahogany Chris Craft Speedboat Model, presented in a lucite case, Case- H.- 10 1/4 in., W.- 30 1/2 in., D.- 12 1/8 in., Boat- H.- 3 1/2 in., W.- 28 in., D.- 6 in.

Lionel pressed steel clockwork speedboat with composition driver and passenger, 18'' l.

Lionel craft clockwork speedboat, 16 3/4'' l.

Decal on rear of boat marked "Hornby Speedboat Meccano Liverpool". Has two decals on front which say "Viking". Unusual shape. Has some use. Missing front mast. Wind-up mechanism is working properly. C

American. 1920s. Stained wood with brass accents. Marked, "Mengel Playthings" rear. 3 1/2 x 15 x 4". Mechanically functioning. Original varnish surface exhibits uniform craze. Shallow impressions to b

Hand constructed model made of mahogany with brass trim pieces. Two vinyl covered seats. Good condition with a few drying cracks between planks. Includes stand. 38" L x 9" W x 6" H approx.

A collection of reference photographs of the "Speedboat" Starfleet shuttle used in Star Trek: Voyager. These printed photographs feature the top and bottom view of the model with dimensions and shots

Wooden speedboat model with cockpit. displayed on a wooden cradle. Overall Dimensions: 10.5" x 4" x 4.5" Weight: 6lbs

rated 9.5, 12.5"L., the wood and metal speed boat is in excellent condition, has metal stand, box has wear and paper loss.

Marked 44 on both side. Original composition drivers, drivers do have some flaking and wear. Original rudder, marked Lionel Craft. Clockwork mechanism needs to be repaired. One left front cleat missin

Daum crystal Monaco speedboat model, signed Daum France, 3.5" h. x 15.25", missing base. No condition issues noted.

A German D.R.G.M. Gama T56 Tinplate Clockwork Toy Tank ~ This miniature clockwork model has a grey-green body with lithograph details, a sparking action to the front and original rubber tracks. It is

Handcrafted decorative Italian Riva Aquarama model speedboat, exceptional quality. Dimensions: 25” L x 8” W x 7.5” H

Handcrafted decorative Italian Riva Aquarama model speedboat, exceptional quality. Dimensions: 25” L x 8” W x 7.5” H

Rare speedboat builders model of a very unusual design. Flared stern. Old paint. Original varnished backboard. Backboard is pierced with two holes. Weight is 4 pounds. 8" H x 33" L.

Chris Craft Runabout handcrafted wooden model speedboat, made from birch, maple, yellow siris wood, with three cockpits lined with seats, steering wheel, American flag, and rope fixtures. Sturdy woode

Dimensions: (Case) H 14.5" x W 29" x D 12" Condition: A couple light rubs to case at corners. One small miss to wood stain finish on boat.

Chris Craft Triple Cockpit 20" Wooden Model Speedboat Feel as if you’re speeding across the water with the wind in your hair with this powerboat model of a classic mahogany hulled Chris Cr

Classic mahogany hulled Riva Aquarama model speedboat. Crafted using mahogany, birch & maple wood. Individual decking planks, visible steering wheel, deck cleats, Italian flag and other details Sturdy

20" Classic Chris Craft Triple Cockpit Wooden Model Speedboat Experience the allure of maritime history with the 20" Classic Chris Craft Triple Cockpit Wooden Model Speedboat—a meticulously