Craftsweld air control valve

Equipment looks like it was taken right off helmet after a job. Items include a vintage Mark V air control valve with no manufacturers name, a whip made by Republic Rubber in 1964 and lastly a 54 inch

This is a very nice World War 2 Schrader air control valve and whip. The valve is stamped Schrader USA with a large US Navy inspection stamp below it. The whip is an original made by US Rubber dated A

This is a very nice original World War 2 air control valve and whip. The valve is stamped Schrader along with a US Navy inspection stamp. There is also the name Ruskinn stamped on both sides of the va

This is a vintage USN Mark V diving helmet air control valve. It is made of solid brass and was the first configuration used during the first half of the 20th century. In the 1916 US Navy diving manua

Excellent grouping of WWII USN Mark V related diving equipment. The first piece is a Morse Diving Equipment Air Control valve. There is a small section of hose still attached as well as a brass swivel

This is a very nice collection of authentic equipment used on both the US Navy Mark V systems as well as commercial helmets. The lot consists of a vintage air control valve, no manufacturers name pres

This is a vintage USN Mark V diving helmet air control valve. It is made of solid brass and was the first configuration used during the first half of the 20th century. In the 1916 US Navy diving manua

Like new with original cardboard thread protectors is this Morse Diving Equipment air control valve. This piece of equipment was used with the US Navy Mark V diving helmet. It attached to the bastard

Excellent new old stock air control valve made by Morse Diving Equipment in Boston. Valve is clearly stamped with company information. This valve is the type used in conjunction with the Mark V diving

Nice example of a air control valve. This piece of equipment was used in conjunction with the US Navy Mark V diving helmet. The air control valve was attached to the whip, which attached to the air fi

Nice original air control valve made by Schrader. This is the type of valve used with the Mark V diving helmet. This piece does have the Schrader name stamped on it as well as a US Navy inspection sta

Antique divers air control valve. This is a Y stye valve made by Crane with a old faucet style wheel. Valve also has a old clip and nylon strap attached to it. Great piece to have with any antique com

Original Swan Rubber Company Divers H.P. or whip. This section of hose attached to the non-return valve on the Mark V and then to the air control valve. Hose is in excellent condition and dated Septem

Original used Republic Rubber Co whip. This 3-foot-long rubber hose with female connections went from the helmet to the air control valve. Good example for display purposes only. Dated 1958. All items

This is an original grouping of used diving equipment parts. The parts include an air control valve with a US Navy inspection stamp, an air hose filter housing stamped Morse Diving Equipment, air hose

This is a vintage USN Mark V diving helmet air control valve. NEW OLD STOCK in its original WWII box. The valve is clearly stamped A. Schrader’s Son. This valve is new old stock never used. Note the

Very nice vintage divers whip. This section of hose connected the Mark V helmet to the air control valve. This whip was made by Republic Rubber during August of 1966. Excellent example for display pur

This is an original grouping of used diving equipment parts. The parts include an air control valve stamped Schrader USA, an air line filter housing stamped Morse Diving Equipment, six dry suit clamps

Draeger 1st stage regulator with pressure gauge for the DM200 and DM220 diving helmet systems. This would attached to the tank HP supply and to the 2nd stage air control valve. Appears to be in excell

This is an original grouping of used diving equipment parts. The parts include an air control valve stamped Morse Diving Equipment, brass clip, two complete dry suit clamps and two incomplete clamps,

Excellent condition Mark V divers whip. This air supply house connects to the air fitting on a Mark V helmet and also to the air control valve. This whip was made by Republic Rubber during October 197

This is a grouping of six total brass air line fittings. The pieces appear to be in good used condition. The non-return valve is stamped DESCO. There is a double male fitting stamped Morse Diving Equi

Japanese Bandai tin litho battery operated air control station. In original box. Shows child using control station. Box has some tearing and staining to box lid. Some scratching and ware to toy especi

Draeger adjustable air valve with factory hose and leather belt for the DM200 and DM220 diving helmet systems. This would attached to the helmet for surface supplied air. Appears to be in excellent co