EAMES FOR HERMAN MILLER TANDEM 2 SEAT BENCH & TABLE,

CHARLES EAMES for HERMAN MILLER La Fonda Tandem Bench. Vinyl upholstered fiberglass shell seat. 2 seats with laminate table.-- Dimensions: H: 27.5 inches: W: 79 inches: D: 22 inches ---

Chrome frame. Leather upholstery. 7 seats. 8 arm rests. 33 1/4" h x 164" w x 27" d. Seat height 18 1/2".

Herman Miller Label - 99 in L - 23 in D - 31 in H - Seat Height 18 in - Table 22 in X 17 in - 17 in H

Charles and Ray Eames, manufactured by Herman Miller, dated July 1971; bank of four vinyl upholstered seats attached to aluminum trestle base, with attached white top end table, 32 1/2 in. H., 129 in.

Charles & Ray Eames for Herman Miller tandem bench, red white and blue painted fiberglass with metal base, underside of seat with molded marking. Seats can be removed / unscrewed. 31.5" H x 104.24" W

Charles and Ray Eames for Herman Miller 4 - Seat Tandem Bench in Orange. Each chair marked Herman Miller beneath the seat.

Aluminum frame, 3 vinyl (as is) sling seats. 71 W X 27" D X 34" H."

With built in side table. Metal. 33 1/4" h x 67" w x 28" d. Seat height 15 1/2".

Marked Herman Miller. Black and chrome metal base. Blue upholstered seats. White laminate side table. 32 1/2"h. x 129"w. x 24"d.

Charles and Ray Eames, manufactured by Herman Miller, dated July 1971; two sets of three banks of vinyl upholstered seats attached to aluminum trestle bases, 32 in. H., 78 in. W. 23 1/2 in. D.

Vintage from the 1960s Materials: leather, aluminum Overall width: 72 inches Overall height: 34 inches Overall depth: 28 inches Seat height: 17 inches Description Mid Century Modern Eames 3 Tandem Sli

Two (2) Charles Eames for Herman Miller LTR occasional tables or stools with wire bases. Need restoration. Both have label, see pictures. Measure 13.25 in. x 15.75 x 10 in. tall each. Weigh 10 lbs as

Charles Eames (American, 1907-1978), and Ray Eames (American, 1912-1988). Fiberglass, metal, c. 1954-1955. Designed for Herman Miller. Model: LAR. Height: 24 1/4", Length: 25", Depth: 24 1/2", Seat He

molded walnut plywood, chromed metal; unsigned 29 1/2 x 19 1/2 x 22 1/2 in. (74.9 x 49.5 x 57.2 cm.), seat height: 18 in. (45.7 cm.) Provenance: Property from the Collection of William Krisel, AIA

Pair of Charles & Ray Eames for Herman Miller Low Lounge Chairs having label to underside height 26 1/2 inches, seat height 15 inches, width 22 inches Provenance: Estate of Sheila Shevin of Rye, New Y

Metal frame. On wheels. Tufted back. Signed Eames. 34" h x 26 1/4" w x 27 1/2" d. Seat height 17".

Metal frame. On wheels. Tufted back. Signed Eames. 34" h x 26 1/4" w x 27 1/2" d. Seat height 17".

21st century brown ribbed design desk / office swivel chair on chrome base with casters, by Charles Eames for Herman Miller. [32 1/2" H x 20" W x 21" D; 18 1/2" to seat].

Four seat tandem seating unit by Charles Eames for Herman Miller, 1960s. 32" H x 105" W x 23" D.

Herman Miller for Eames black leather and 5-ply molded wood chair and ottoman. [30" H x 32 1/2" W x 34" D; 11 1/2" to seat]. Leather torn and clawed, especially at arm rests; padding separating at top

Herman Miller for Eames black leather and 5-ply molded wood chair and ottoman. [30" H x 32 1/2" W x 34" D; 11 1/2" to seat]. Leather clawed, especially at arm rests.

Molded plywood in a black finish on tubular chrome steel bases, including the DTM-2 folding card table, and a set of (3) side chairs. Unmarked. Surface wear including some areas of loss to the veneer,

Dining set, Zeeland, MI, ca. 1960; Zinc-plated and enameled steel, polished aluminum, plastic reinforced fiberglass, rubber; Remnants of labels to all; Table: 25 1/2" x 36" dia., chairs: 28" x 19" x 2

Approx 21 7/8" wide, 16" to seat, 20 1/2" deep,and 27" tall. NO SHIPPING !