General Aquadyne AH-2 Fiberglass Diving Helmet

This is one of the classic early fiberglass diving helmets first produced in 1969 by General Aquadyne in Santa Barbara, California. This AH-2 model is in very nice original condition. The black gelcoa

This is one of the classic early fiberglass diving helmets first produced in 1969 by General Aquadyne in Santa Barbara, California. This AH-2 model is in very good original condition. The black gelcoa

This is one of the classic early fiberglass diving helmets first produced in 1969 by General Aquadyne in Santa Barbara, California. This AH-2 model is in excellent original condition. The helmet appea

One of the classic early fiberglass diving helmets first produced in 1969 by General Aquadyne in Santa Barbara, California. This AH-2 model is in excellent original condition. The black gelcoat paint

This diving helmet is one of the best-looking we have ever handled at auction! Selling at no reserve is a Joe Savoie mixed gas model diving helmet. The helmet is an early fiberglass example. Savoie’

Very impressive Draeger diving helmet made circa 1973. This is the model DM200, which utilizes a fiberglass body. Built very similar to traditional copper & brass models, this is a twelve bolt two lig

This is a very interesting and possibly unique fiberglass diving helmet that has been recently discovered. Found in Canada, this helmet has a strong resemblance to the famed Rat Hat designed by Bob Ra

This is an authentic Kirby Morgan model 17B diving helmet. This attractive helmet was part of a collection of diving gear located Europe for years. The fiberglass shell was originally the Kirby Morgan

This is a Genesis II fiberglass diving helmet made by Submarine Systems located in the United Kingdom. This hat has a current inspection and is ready to dive out of the bag. Just a few light scratches

Contemporary set of four weights that will fit the Miller Dunn Divinhood Style #1 and or #2. Each lead weight has the correct copper tab on back and Miller Dunn company information on the front. Each

Beneath Tropic Seas. A Record of Diving among the Coral Reefs of Haiti, by William Beebe. Very early book on marine life on coral reefs by the famed Director of the Department of Zoology of the New Yo

One of the first and very successful fiberglass diving helmets to be produced was made by Advanced Diving Equipment Company. The helmet was invented by George Swindell and became very popular with div

This is an early example of fiberglass diving helmet made by the Advanced Diving Equipment Company and designed by George Swindell. Their first helmets utilized one large window with relatively simple

This helmet represents one of the earliest modern fiberglass diving helmets made! Manufactured by Advanced Diving Equipment Company and designed by George Swindell, this specific example is quite uniq

This is a uniquely styled and likely early 1960s or 1970s fiberglass diving helmet shell. Its style is similar to early Kirby Morgan prototype models. The shell weighs approximately 5 pounds. It is pa

An excellent example of a World War 2 era diving helmet or mask. This rubber mask was made by Ohio Rubber Company. These were commonly used for diving in cramped shallow water environments. Masks like

Nice pair of US Navy Mark V diving helmet plaques. One plaque is made of cast aluminum, measuring 6.5 inches tall and 4.25 inches wide. The second piece appears to be made of soap stone and is 4.25 in

This lot is made up of 2 copper and brass decorative diving helmets. Both are nicely detailed and have a developed an authentic patina. Both measure approximately 7” tall and weigh 2 pounds 5 ounces

Starting in 1968 DESCO (Diving Equipment and Supply Company) debuted the now iconic and still in use Air Hat. These helmets are also known as Free Flow or Pot Hats. Constructed of spun copper with a l

This is an original 2 volume set of reduced drawings for each and every part of the Mark 12 diving system. Each large volume measures 18 inches wide and 12 inches tall and weight approximately 10 poun

Seven original Association of Diving Contractors International Underwater magazines with articles on the individual model helmets that launched commercial mixed gas diving. Helmets include General Off

No markings. 8-3/4" wide x 10-1/2" deep x 6-1/2" high. Some scratches and paint losses. LR Provenance: From the estate of Mary Trost who last resided in the multi generational family home located in C

This is an original grouping of Mark V parts. The grouping includes a T wrench, comms elbow and cap, non-return valve, spitcock valve, dumbbell safety lever, four copper brail shims, dumbbell safety l

Excellent fiberglass replica of a Yokohama diving helmet. Helmet is a full size replica, weighing 9 pounds and made of one piece. Impressive faux patina on surface. Perfect decor piece and easy to dis