HALF HULL MODEL OF SLOOP "GARY THOMAS" BY MICHAEL LAWLER

Half Hull Model sloop made of wood on wooden plaque. On rear this model reads: "One piece pine sloop, much like catboat." On reverse: "Warren, R.I.C., circa 1880, with original backboard." Dimension

MOUNTED HALF HULL MODEL OF A SLOOPLate 19th CenturyBlack hull with bronze bottom.Backboard 13.25" x 42".

TWO MOUNTED BUILDER’S HALF HULL MODELS19th Century1) Sloop built up in nine lifts. Applied skeg and rudder. Backboard 7.75” x 25.5”.2) Ship built up in eight lifts. Inscribed on back

MOUNTED BUILDER'S HALF HULL MODEL OF A SHOAL DRAFT SLOOPAmerica, Late 19th CenturyHull built up in eleven lifts of alternating yellow pine and mahogany. Mounted on a later white-painted backboard.Back

Rigged Half-Hull Model of a Gaff Rigged Sloop, circa 1900, carved and painted hull with cardstock sails, cotton string rigging, set into a blue painted shadowbox with walnut molded frame, 19 1/2" x 20

Large old carved and painted wood half-hull model of the RED JACKET built by George Thomas of Rockland, Maine. 65.6 x 15 x 5 in deep.

2 vintage painted wood half-hull models signed Ed Riley of Boothbay Maine: FRIENDSHIP SLOOP, 17 x 6 inches, and MAINE LOBSTER BOAT 2009, 16.5 x 5.75 inches.

Sloop designed by Olin Stephens America Cup Defender. 29"l x 8"w

(lot of 3) American Primitive half hull wood carved wall ship's models circa 1870, largest 10"h x 37"w. Provenance: Property from the estate of Thomas J. Perkins, San Francisco, and Belvedere, CA

Half model of a Herreshoff twelve and a half sloop by Marsom Pratt. Hull is painted white over green. Signed by artist on rear. Dimensions:18 long by 7 tall.

Varnished half model of an Ablemarle Sound Boat, a centerboard sloop with Stubbed mast and tiller. Pine hull mounted to a mahogany backboard. Dimensions: 17 long by 8 tall

MOUNTED BUILDER’S HALF HULL MODEL OF THE STEAM/SAIL YACHT “RAMACE FERGUSON”Late 19th CenturyBuilt up in six visible lifts. Black hull with natural wood bottom. Identifying plaque on

A Nautical Half Hull Model 20th Century identified as the SS Cedartree / Built by John Crown & Sons Ltd - Sunderland / 1928 / For / The Tree Steamship Co Ltd / Howard - Jones Ltd Managers / Cardiff. h

White nautical ship builder's half hull boat model. This large boat model is the perfect statement piece for anyone who loves boating or the craft of boat making. The piece can hang on the wall. The d

Large Half Hull model. "The Great Surgeon". Together with and early photograph of Dr. William H. Thorndike. Known as "The Great Surgeon" for whom the boat was named. Boston area, circa 1880. Condition

H E BOUCHER HALF HULL MODEL, BOAT MEASURES 55" LONG, ON MAHOGANY BOARD, STAMPED ON BACK, AS PICTURED, FROM BROOKLYN NEW YORK ESTATE

MOUNTED BUILDER'S HALF HULL MODEL OF THE DOWNEASTER "ST. JOHN"America, 19th CenturyBuilt up in eleven alternating pine and mahogany lifts. Small carved billethead below bowsprit.Dark green b

ALDEN MOUNTED HALF HULL MODEL OF A COAST GUARD CUTTERFirst Half of the 20th CenturyBuilt up in five lifts. Hull with extensive builder's markings.Backboard 10" x 55".Provenance:Northeast

Laminated pine half-hull model, 19th c., mounted on a walnut backboard. 9.5"h.x38"l.x6"d.

Large presentation half-hull model, 20th/21st c., American, mounted on wood panel and raised on wood stand with tag reading in part "M/Y Aqualibrium 131' CRN Twin Screw Motor Yacht Handcrafted by Capt

Laminated pine half-hull model mounted on a mahogany backboard. 9"h.x32.25"l.x5.5"d.

MID-CENTURY DECORATED HALF-HULL MODEL, THE FLYING CLOUD. FRAMED AND GLAZED-30 X 42+ACI-

TWO MOUNTED DECORATIVE HALF HULL MODELS20th CenturyModels of the Comet and the Red Jacket. Vessels identified on brass plaques.Backboards 8” x 35” and 9” x 39”.

Two builders mounted models to include a hand carved half hull marked R.M. Gatter and a mounted half hull named Winter 21, signed Walt Hunt 85 lower left. Larger: 11in tall x 32in wide. | Philadelphia