Hans Brattrud - Scandia Chair

A single 'Scandia' chair by Hans Brattrud. 31 x 20.5 x 19. Measurements are in inches. (Height x Width x Depth)

Designed by Hans Brattrud for Hove Mobler, Norway, 1957. Teak w/ chrome-plated steel base. Dimensions: H 36" x W 16.75" x D 17" x SH 19" Condition: Only minor scuffs and signs of age. Cracks to seats

Designed by Hans Brattrud for Hove Mobler, Norway, 1957. Teak w/ chrome-plated steel base. Dimensions: H 36" x W 16.75" x D 17" x SH 19" Condition: Only minor scuffs and signs of age.

A Hans Brattrud for Hove Mobler rosewood "Scandia" chair. Label on bottom. 30.5 x 19 x 19 . All measurements are in inches.

A set of six 'Scandia' dining chairs by Hans Brattrud. Five in rosewood and one in teak. 31 x 18 x 21. All measurements are in inches.

A set of four 'Scandia' chairs by Hans Brattrud for Hove Mobler, Norway, in teak. 31.5 x 19 x 20 . Measurements are in inches. (Height x Width x Depth)

Hans Brattrud (1933-2017) for Hove Mobler, Norway. Pair of mid-century modern Scandia dining chairs, ca. 1957. Teak and chrome plated steel.Each; height: 32 in x width: 19 in x depth: 17 in.

Hans Brattrud (1933-2017) for Hove Mobler, Norway. Mid-century modern Scandia dining chair, ca. 1957. Teak and chrome plated steel.Height: 32 in x width: 19 in x depth: 17 in.

(P3) From the same estate as lot 1 of this auction, these three rosewood dining chairs by Hans Brattrud were given a full restoration. There is some loss to the wooden slats in places, and the slats h

Hans Brattrud 'Scandia' Bentwood Danish Modern Teak Chair Norway 1960 Dimensions: H: 32 inches: W: 19 inches: D: 20 inches - Seat Height: 17.5 inches ---

A Mid Century Scandia Chair designed by Hans Brattrud for Hove Mobler 80 x 50 x 45 cm.

Hans Brattrud (Norway, 1933-2017), Scandia Rosewood Lounge Chair1960s, for Georg Eknes, bent rosewood slat back and seat with black naugahyde head rest, swivel seat with angle adjustment, four-leg ste

Hans Brattrud Scandia Danish Modern Teak Dining Table Dimensions: H: 28.5 inches: W: 45.5 inches: D: 45.5 inches ---

Hans Brattrud Scandia Danish Modern Teak Dining Table Dimensions: H: 28.5 inches: W: 45.5 inches: D: 45.5 inches --- We offer curbside delivery to NYC, Manhattan, Close Brooklyn, Hoboken about a week

Hans Brattrud lounge chair and ottoman. Hove Mobler Norway, 1957 laminated rosewood, chrome-plated steel, leather, enameled steel, plastic. From an East 67 St NYC estate. Dimensions: 29" w x 36&q

Description - Set of 4 Hans Brattrud dining chairs. Dimensions - 32" x 19" x 19"

Four teak bentwood dining chairs by Hans Brattrud for Hove Mobler, Norway 1960s.

Hans Brattrud, 'Skandia Junior' stacking chair, 1957, H. 81 x 50 x 52 cm. Made by Hove Mobler, Stordal, Norway. Bent plywood, nutwood veneer, chrome-plated steel rods, black leatherette. Marked: Maker

Circa 1950. Labelled Hove Mobler Norway. Approx. 37 3/4" H x 19" W x 20" D. There is some repair on one of the chairs - cross bar on the seat part.(7025)

With original pillow, paper label, excellent condition. 29"w x 33"d x 42"h.

Hans Brattrud (Norwegian, 1933-2017)Lounge Chair, 1957, Hove MoblerLaminate

Pair of Norwegian Hans Brattrud for Hove Mobler stacking dining chairs circa 1958, each with bentwood slats on chrome steel wire supports, and retaining legible Hove Mobler tag to the underside 31"h,

Manner of Hans Brattrud Norway, c. 1960s pair of lounge chairs laminated rosewood, chrome-plated steel unmarked Height 33 x width 27 1/2 x depth 31 inches Estimate $800-1,200 Overall good condition. F

Set 4 Rosewood Slat Back HOVE MOBLER Lounge Chair. Stacking. Angle shaped seats & backs. Black vinyl cushions. Thin chrome tube frame. Marked. Designed by HANS BRATTRUD. -- Dimensions: H: 32 inches: W