Miller Dunn #1 Divers Air Pump With Handle

Featured is an early style model 1 Miller Dunn divers air pump. This type of pump was sold with the famed Miller Dunn Divinhood shallow water helmets. Also included is a vintage handle for the pump. T

This is a nice original Miller Dunn model 1A shallow water air pump. This example retains the original handle with wood end. The pump frame is cast iron. Both cylinders are clearly marked Miller Dunn

While Miller Dunn pumps are generally not rare, an early model No 1 made of brass is. A vast majority of Miller Dunn shallow water pumps surviving are model 1A. According to the book The Divinhood by

This is a classic Miller Dunn model 1a shallow water diving air pump. This style of pump was used with all three models of Miller Dunn helmets. The pump does come with a custom handle. Accompanying th

Pair of original Miller Dunn components often missing with the famous Divinhood helmets the company produced. This lot consists of an original Miller Dunn No 1A hand powered air pump. These pumps were

In like new condition is this vintage Morse divers air pump plaque. Made of brass, this specific plaque would have been mounted on the top inside edge of a 2-diver air pump. The operator could move a

This is a very nice original Morse Diving Equipment Model 15 air pump. This is the same put that would accompany the Model 15 shallow water diving helmet. The original two piece cast iron handle and b

Antique air pump in brass with wood handle by Ansonia MFC Co., circa 1910. Measures 19" x 8 1/4"

While Miller Dunn pumps generally are not particularly rare, an early model No 1 made of brass is. A vast majority of Miller Dunn shallow water pumps surviving are model 1A. According to the book The

American. 1920s. Cast iron and brass. This heavy pump has two reciprocating cylinders mounted astride a support with pivoting rocker arms. The steel handle used at the top of the rocker is pushed back

This divers air pump was made by arguably the most famous American diving equipment maker, the A.J. Morse & Son Company. Located in Boston, Massachusetts, this company would start making diving helmet

This is the desirable Morse Diving Equipment number 3A divers air pump. This model is considerably smaller than others, making it ideal for display in a home or office. The pump retains its original w

This is a pair of antique cast iron divers air pump wheels. We are unsure of the manufacturer. Each wheel weighs 52 pounds and measures 23 inches in diameter. These are relatively small wheels. One wh

This is a complete set of four lead weights for a Miller Dunn Divinhood Style 1 or 2. Both models of helmets utilized a copper strip that allowed the weights to be hooked to them via a copper tab on t

This is a complete set of four lead weights for a Miller Dunn Divinhood Style 1 or 2. Both models of helmets utilized a copper strip that allowed the weights to be hooked to them via a copper tab on t

This is a complete set of four lead weights for a Miller Dunn Divinhood Style 1 or 2. Both models of helmets utilized a copper strip that allowed the weights to be hooked to them via a copper tab on t

Antique air pressure gauge that would have been used on a divers air pump. Gauge measures 6 inches in diameter and is mounted to a small wood display block. Looks very nice next to any antique diving

Rare antique brass and copper air pressure hand pump for early divers that wore a large brass helmet having an air hose to surface. Signed Wm. Boekel Phila 1904. 27 in high.

Very attractive and desirable Siebe Gorman divers air pump. This is a single diver single cylinder double acting pump. The single cylinder is water cooled via a gutter on the back side. With just a si

This is a nice all original unrestored and untested No. 17 divers air pump. It was likely made by Morse but their name is not found anywhere on the pump. A serial number on one side, 7153, is consiste

Original divers air pump compressor gauges are works of industrial art in themselves. The challenge is finding a way to display them. Long ago, a clever diver with spare diving equipment parts made th

Contemporary set of four weights that will fit the Miller Dunn Divinhood Style #1 and or #2. Each lead weight has the correct copper tab on back and Miller Dunn company information on the front. Each

This helmet was made by the Miller Dunn Company located in Miami, FL approximately 1916. Their very first helmet was made in 1915 and was called the Divinhood. They would go on to produce the Divinhoo

Miller-Dunn Co. Miller Dunn Divinhood Style 1 Shallow Water Helmet Patent 1916. Stamped. Metal helmet. Rare example. Well worn with dents and expected patina. Good to fair condition. 21”h x 11&#