Steamboat 2 1/2 Bell Steam Whistle

American. 1930s. Brass. Marked, "E", in casting on base. 11.5" with 2.5" bell and 0.75" inlet. From the William Robert Wilson Collection.

12" Single Chime Steam Whistle Bell measures 10 1/2" tall and has an 1 1/4" inlet. The bell has two moderate grinding marks which have opened up pinhole leaks in one side of the bell. No manufacturing

14 1/2" Tall Single Chime Steam Whistle Whistle valve has a 1" diameter inlet and the body is stamped with 44 1/2". Lever moves freely and returns to original position. The bell is clean with no notab

A brass steam whistle by Buckeye Brass Works in Dayton, Ohio. It has a 2 1/2" diameter, 5 1/2" cylinder and it stands 14 1/2" tall overall. It has a fine acorn finial. There are a few dings. The Bucke

Brass steam whistle. 9 ½" x 2 ¾".

Lunkenheimer 13 1/2" Steam Whistle Whistle has a 1" diameter pipe inlet. Whistle measures 13 1/2" tall and the valve is stamped with 3 1200 on one side and Lunkenheimer on the other side. The whistle

Nice original brass steam whistle. 10 1/2" Excellent

Four (4). American. 1930s. Includes: 4.75" (l) x 2.25" (d), 5" (l) x 2.5" (d), 6" (l) x 3" (d) and 5" (l) x 2" (d) bells. One marked, "Crane 1/2 1505".

Brass steam railroad train whistle, 12"l, 2 1/2"d

Brass 6" diameter with 12 1/2" chamber length. Acorn finial, no markings. It is mounted on a wooden base with room for another whistle on the stand. The whole unit stands about 23" tall. The control a

Unmarked Maker. 12" x 2"

"Märklin No. 401" Convertible Steam Engine, c. 1930 For use as a horizontal or vertical stationary steam engine, with steam whistle, fixed cylinder Ø ½ in., boiler Ø 2 in., flywheel Ø 2 1/8 in.,

Older steam locomotive bell with 2 concentric rings on the bottom edge. The cast Iron yoke has some casting marks that are hard to read. This bell does not have any shop stamps. Including the rolling

All Brass, acorn finial. 12" tall x 2.75

Nice Christmas set with cast 4-4-2 Atlantic steam loco with bell, whistle, smoke & light, coach & observation, track & transformer. Set appears to be test run with shop worn setbox, C9

Three Chime Brass Steam Whistle. Measures 18 1/2" from end to end. 1 1/2" inlet. The diameter of the bell is 5 1/2". There are no stampings, casting numbers, etc. on this whistle. It is completely unm

11 1/4"x 2 7/8" Whistle, Total Dimensions 12 1/4"x3 1/2", 1" OD

A cast bronze five-chime whistle, made in the NPRR shops. Two fins repaired. Includes heavy adapter for 1 - 1/2" NPT. Overall height 20" with a fluted bell diameter of 6 - 1/2". This is not a standard

Three Chime Brass Steam Locomotive Whistle Whistle measures 11 1/4" tall with a 4" diameter bell. The inlet size is 1 3/4". The bell has an 1 1/2" shallow dent near the top and other minor areas of pi

14 1/2" Diameter Brass steam locomotive bell. The bell is polished brass with a repainted red interior. Equipped with a Trans Devices ringer. The bell itself is otherwise unmarked. The yolk has 12 V S

A Lunkenheimer bronze three-chime whistle. The bell measures 6" in diameter and 23" tall to the top of the acorn finial. There is no valve hardware. It is mounted on a 5 - 1/2" pipe flange for display

Lionel O Gauge Prewar 226E Locomotive and 2226W Whistling Tender.: 226 2-6-4 Locomotive - marker lights, bell, whistle, handrails and piping, rods and valve gear, pilot truck/wheels and trailing truck

12 3/8"x2 7/8" Whistle, Total Dimensions 17 3/4"x5 1/2" with Handle, 3/4" ID

Powell 2 1/2" Diameter Three Chime Whistle w/ 1" Inlet Powell 2 1/2" Diameter Three Chime Whistle w/ 1" Inlet. Overall height is approximately 10" Bell has moderate denting, the valve body has scaring