VINTAGE SHIP BUILDER'S HALF HULL

Vintage Ship Builder's Half Hull Model of a Catboat, circa 1920, Stacked wooden lift construction with painted hull and detailed deck. On original mahogany backboard with cutout on reverse to show hul

Vintage Ship Builder's Half Hull Model, "Lettie S. Reed", mounted on board, depicting a two masted ship with brass name plaque, "Lettie S. Reed, Built 1866 East Boothbay, 50 Ton, 66 Feet" 18 in. x 26

Late 19th c. Pine Half Hull, not mounted on plaque, unidentified maker and ship, roughly 6" x 42" x 5". Refinished.

Vintage Hand Painted Plank on Frame Half Hull Builders Model of the Iron Ship "Centaur", built in Portsmouth in 1865, carved and painted hull mounted on painted backboard. Length 44 in. Height 10 in.

Vintage wood half hull model of a side paddle steam ship SF ROTHSAY BUILDER, MCKAY & BEGG, GREENOCK. 37.5 in long x 9 in high.

White nautical ship builder's half hull boat model. This large boat model is the perfect statement piece for anyone who loves boating or the craft of boat making. The piece can hang on the wall. The d

MOUNTED ON A 29" X 3" PINE BOARD

Half-Hull Ship Builder’s Model, New Bedford Whaler, 19th century. Length 49"

Vintage 12-Lift Ship Maker's Half Hull Boat Model, multi-wood construction mounted on beveled edge board 9.5 in. x 30 in.

Vintage Half Hull Ship's Model Wall Hanging Plaque By Davie Shipbuilding Limited, 1964. Tag affixed to the frame marked M.V. Blue Peter-II Hull-645, M.V. Blue Cloud Hull-646 220'-0" X35'-0"x19"-0". Ov

Vintage Half Hull Ship's Model Wall Hanging Plaque of the Second Class C Annual Spring Race Huntington Yatch Club. Tags affixed to the frame. Measures 14" x 35". Condition: Surface wear to the hull ot

Vintage Half Hull Ship's Model Wall Hanging Plaque of the "Endeavour, Seacraft Classic". Tag affixed to the frame. Measures 10-1/4" x 30-1/4". Condition: Normal surface scuffs otherwise good condition

Vintage Half Hull Ship's Model Wall Hanging Plaque of the "Yankee". Ship's information applied information lower right. Measures 10-1/2" x 36". Condition: Surface rubbing and scuffs otherwise good con

Grouping of Two (2) Vintage Wooden Half Hull Ship's Models. One is Titled "Out Island 41". Largest measures 16-3/8" x 39-1/2". Other measures 9-1/2" x 26-3/4". Condition: Each with some surface scuffs

Vintage Wooden Half Hull Ship's Model Wall Hanging Plaque. Measures 8" x 46". Condition: Very minor surface wear otherwise good condition. Estimate: $100.00 - $200.00 Domestic Shipping: Third party

Unmarked except for registration number on the hull. Dimensions: L 55" x W 11.5" x D 5.5" Condition: Surface rubbing. Staining. A few nicks on the edges.

MOUNTED BUILDER'S HALF HULL MODELLate 19th/Early 20th CenturyProbably an ore ship. Hull painted white.Mahogany backboard 15" x 72.25".

BUILDER'S HALF HULL MODEL OF THE SAIL/STEAM SHIP "LUZON"Circa 1864By Alexander Stephens & Son Shipbuilders, Linthouse, Govan, Scotland. Hull built up in ten lifts. Bottom finished bright and

BUILDER'S HALF HULL MODEL OF A COASTAL PACKET SHIP19th CenturyBuilt up in eight lifts. Stained a mahogany color. Height 9”. Length 57”. Depth 6.75”.

Collection of (4) Handmade Ship Models, including: Half hull model of a sailing yacht, blue and white painted hull, 25 1/4" x 7 1/2", surface wear, paint losses, holes and crack in base; Two masted sa

Builders half-hull bark model, mounted and dated 1860. Reverse with ink inscription of ship's name, makers name, date and other writing. Overall size 15 x 64

Contemporary Boat Maker's Half Hull Model, "Ship No. 18, length 175 ft, Tons 1,802, Geo. Maycock & Co Ship Builders, Leith 1853". Overall 42.5 in. x 9 in. Dimensions Overall 42.5 in. x 9 in.

TWO MOUNTED BUILDER’S HALF HULL MODELS19th Century1) Sloop built up in nine lifts. Applied skeg and rudder. Backboard 7.75” x 25.5”.2) Ship built up in eight lifts. Inscribed on back

BUILDER’S HALF HULL MODEL OF A MOTOR VESSELEarly 20th CenturyBuilder’s markings on exterior of hull. Marked on top “Ships’ No’s. 471 + 472”.7” x 46”.