ATWATER KENT RADIO, MODEL 38, WITH SPEAKER

Atwater Kent Tube Radio with Speaker, Model 40. Type E Speaker. This item requires third party shipping or pickup arrangements to be made. Dimensions when stacked: 26 x 17 x 11

In Original Box

Atwater Kent Model E Radio Speaker. This item requires third-party shipping or pickup arrangements to be made. Dimensions: 18 x 16 x 6

Measures 16" diameter x 18" tall

A rare early radio 5-tube set; tubes are absent. Included speaker is an Atwater Kent type M loudspeaker with a large, heavy steel horn. Speaker has been tested using a modern audio amplifier connected

LOT (2) INCLUDING ATWATER KENT MODEL 55 METAL AC RADIO WITH MODEL E SPEAKER, C.1929. HEIGHT 8"; WIDTH 21"; SPEAKER/HEIGHT 18"

This Atwater Kent Model 55 radio includes a F-4 speaker, and original instruction book dated July 1929. There is some paint loss on the radio.. The radio comes with an Atwater Kent F-4 speaker. the sp

All Metal. Measures approximately 21 inches tall by 13 inches.

All Metal. Measures approximately 19 inches tall by 11 inches.

one lot.

This Atwater Kent Model 30 is a 5-tube receiver; four tubes are present. Coils are present. The included speaker is an Atwater Kent type E3 radio speaker, an attractive cast metal speaker, with a comb

Radio untested - complete with tubes. Speaker has been tested using a modern audio amplifier connected to an 8 ohm to 600 ohm matching transformer; it works and plays music. Dimensions: (Speaker) H 19

1920's Atwater Kent Tube Radio Model 40 Condition:  Untested, would require an external speaker which is not included to be able to hear it

This is an Atwater Kent antique tube radio and 15 1/2" speaker for local pick-up only. The radio weighs 34 lbs. (not counting speaker) so I am selling for pick up only at this point. The radio is mark

A nice, clean battery set. Radio measures 6.5 x 21 x 7 inches with a speaker measuring 18 x 15.5 x 5 inches. We happily provide seamless in-house packing and shipping services on nearly everything we

Atwater Kent Model 20 radio with Model H loudspeaker. Radio has 5 tubes present. Speaker has been tested using a modern audio amplifier connected to an 8 ohm to 600 ohm matching transformer; it works

1928 AC-powered metal case radio set made by Atwater Kent Radio of Philadelphia, PA, Model 42, s/n 2201460, with a Model E Speaker, s/n 953402. Tuned Radio Frequency (TRF) radio using a grid lead dete

Model E speaker for Type E radio. Made by Atwater Kent. Cone is in good condition with original cloth in the back (two tears on back cloth material). Vintage. Untested.

ATWATER KENT RADIO PHONOGRAPH LOUD SPEAKER HORN Phonograph radio "Model R" horn made in Philadelphia by the Atwater Kent Co. Horn size: 12" Size: 16"

Atwater Kent receiving set Model 30 radio, Serial No. 579743, 6 ½ inches high x 20 inches wide, and a metal horn speaker Model "H", 22 inches high.

Radio & speaker (2), Federal, Model A-10, wood, c.1925, Exc cosmetic cond, untested, comes w/Atwater Kent Type E2 loudspeaker & copy of instructions, 11.5"H x 24"W x 12"D, speaker 16"H x 13"W.

Vintage table radio by Atwater Kent, Model 47, black metal case w/removable lid, lid has a green painted panel w/emblem, serial #4511018, 8” T x 21” W x 10 ½” D AND a round speaker by A

LOT (3) INCLUDING (2) ATWATER KENT MODEL 35 "COFFIN" BATTERY RADIO RECEIVERS, C.1926, HEIGHT 5 1/2"; WIDTH 17" AND ATWATER KENT MODEL R SPEAKER, HORN, HEIGHT 16"

Atwater Kent Model 20, 5 tube radio with cygnet style speaker.