Fina Identification Sign

SSP, has good color and gloss, shows some wear, discoloration, and chipping, 72"x71.25", rated 8

SSP. It has very good gloss and color. It shows a few chips in the field, as well as chipping along the perimeter. Looks to be a factory mistake, the back side shows graphics under the green back porc

DSP, has good color and gloss, shows some wear, discoloration, and chipping mainly along the edge, displays well and is a hard to find sign, 72" diameter, rated 8.25+ *third party shipping or pick up

Humble Gasoline of Houston, TX Porcelain Sign marked Veribrite Signs - Chicago. This is a single sided porcelain sign in the original ring. It has been clear-coated. There are a few small chips and so

Rated 8.9, 72"D., DSP sign has very good color and gloss, comes with ring and pole.

DSP, has above average color and gloss, shows some wear, discoloration, and chipping throughout, displays well, 72" diameter, rated 8.25 & 8 *third party shipping or pick up required*

American Double Sided Porcelain Identification Sign TAC 8.9. DSP (double sided porcelain) oval sign has excellent color and gloss with chips in the fields and a large chip at top center edge. Marked S

Rated 7.5, 72"D., DSP sign has good color and gloss, has chips and wear in the field, comes with ring and pole.

rated 8.75 & 8, 72"D., DSP sign has excellent color and gloss, display has four or five small chips in the field, reverse has more chips, wear and fine scratches, chips around the perimeter, mount

rated 8.25, 53"x84"x14", DSP diecut sign with neon added is mounted on a new metal can, has very good color and gloss, has chips in the field. TAC #039565

DSP, has good color and gloss, shows some wear, slight discoloration, and chipping throughout, displays well, hard sign to find, 60" diameter, rated 7.75 & 6.75

DSP, has above average color and gloss, shows wear, bends/dents, and chipping throughout, 48"x71.5", rated 7.25

rated 9, 73"x79", SSP diecut sign has excellent color and gloss, marked SPS, dated 1965. The Authentication Company #008547

Rated 8.25, 72"x72", DSP shield-shaped sign has very good color and gloss, has chips and wear in the field, comes with ring and pole.

rated 7, 55"x84", DSP diecut sign has good color and some gloss, has numerous chips and wear. TAC #039700

rated 8.75, 84"x84", DSP sign has excellent color and gloss, has tiny chips in the fields, marked SPS. The Authentication Company #008506

SSP diecut sign, neon added, has good color and gloss, shows some chips, wear, and rust staining, mounted on a new metal can with new neon tubing, marked SPS, dated 1966, 72"x78"x12", rated 7.5

rated 7.75, 72"D., DSP sign has good color and gloss, has chips and wear. TAC #039707

This H-C sign has the original ring. There are some surface scratches and touched-up chips to both sides. It is marked Reg. US Pat Off and measures 72"

Good gloss and color. Several small chips to the field. Marked "M.C.C.". Condition (8.0). Size 60" Dia.

Both sides have very good color and gloss throughout. There are a 4 tiny holes added to the field however it displays very well. The display side is very good with only some very tiny chips in the fie

DSP. C. 1960s double-sided porcelain Texaco service station identification sign. CONDITION: Side 1, has tremendous color and gloss throughout, with only a handful of minor scratches to note in the fie

72"x72", DSP diecut sign has heavy damage, bullet holes, chips and looks like it was almost sand blasted. TAC #040755

Texaco Double Sided Porcelain Die Cut Identification Sign TAC 8.75. DSP (double sided porcelain) die cut sign with excellent color, gloss, and a few chips in the fields. Measures 54"x86". Rated 8.75 b