3 Ham Street Lamp / Lantern Globes

Apprx 8" in diameter and 10 1/4" tall. Bottom diameter is 6 1/8" and top is 5 3/4"

Approx 8" in diameter and 10 1/2" tall. Bottom fitter is 6 1/8" and top is 5 3/4"

Not marked Dietz. Approx 8" in diameter , 10 1/2" tall. 6 1/8" in diameter at bottom edge and 5 3/4" at top.

C.T. Ham No. 9 Globe Street Lamp / Station Lantern- Restored C.T. Ham No. 9 Globe Street Lamp- Restored. 1886 date embossed on the top of the lamp. The body has been repainted. Includes original style

C.T. Ham 3 1/2" Brass Conductors Lantern. The underside of the lamp is marked C.T. HAM MFG CO 3 1/2 Brass has some mild tarnish and streaking. The clear globe and fount are both unmarked. See photos f

Approx 8" in diameter, 10 1/2" tall, 5 1/2" top edge and 6 1/8" bottom

3 Tin street lamp post lanterns possibly German. One metal lamp (Bing?) and 2 tin banks one of them Chein.

Set of 3 Large Octagonal Street Light Lamp Lantern Tops. They are octagonal with tapered bases and textured plastic panes, some of which are blue, and others more of a yellow. The metal seems like it

pair of 10 3/4 inch clear glass street lamp globes minor roughness on edge no major cracks good condition

Approx. 21" H. (4167)

10 3/4 inch embossed no.3 NY US Dietz no.3 clear glass street lamp globe

A group of 3 Ham & Dietz Depot style lamps. Dietz called this a Pioneer adn Ham called it a #9. Common in rural area before WWI these large lamps were located at railroad depots and other venues that

A group of 3 odd lanterns: (1) C. T. Ham #39 bell bottom with double vertical wires and a nice extended base globe - no specific railroad markings (2) unusual Vaclite lantern with cast VACLITE globe a

This is a pair of different C T Ham lanterns. The first is an inspectors lantern. Clear plain globe with correct burner and fount cap. The second is cast with NO 0 S.S.S. on the fount. Comes with clea

(lot of 3) Vintage railroad lanterns and table lamp, 20thc., comprising: (2) Carriage lanterns, each gold-tone, approx 12.25"h, 7"w, 7"d; (1) Handlan lantern, St. Louis, having colored glass globes to

3 Kerosene Lantern Oil Lamps 2-Dietz Ruby Red Globes. Models: Monarch is repainted black w. minor dents. & Little Giant Original green paint has some bends. Tallest measuring 14"T. 1- Wards Better Lam

Lantern & lamp parts that include 3 very old tin pots 2 square, one rectangular, Thompson cage, 3 base collars, 2 pinch pots, 2 2 fixed globe tops, etc.

American. 1870s. Nickel plated brass with clear glass globe. Presentation lantern engraved "D. Allison" on the base. Minor oxidation is evident on the plating at base edge. Minor to moderate loss of n

Antique Ballin Ham #20 Railroad inspector lantern with Reflector and globe. Measures 11 7/8â€w x 14 3/4â€h x 7 1/2†d. Weighs approximately 7 lbs.

These street lamps were created by the Adams-Bagnall Electric Co. during the late 19th and early 20th centuries. With beautiful fluted copper housings flaring out near the base where the glass globes

This is an unusual lantern with a brass top, wire bottom and a 5 3/8" size globe. I've only ever seen these made by Railroad Signal Lamp & Lantern Co in New York. This one is stamped NYNH&HRR on the l

This is a Railroad Signal Lamp & Lantern Company lantern frame. It has the light stamping in the brass top. It takes a stanard 5 3/8" globe. It's also a single piece frame that uses a pinch pot assemb

An older Railroad Signal Lamp & Lantern wire bottom frame with PW&BRR stamped on the lid. It's a 5 3/8" size and has a twist off pot. It's dirty! The globe is a Corning marked PENNSYLVANIA LINES casti

The frame of this NYLE&W Railroad frame was made by Railroad Signal Lamp & Lantern Company. It uses a 5 3/8" globe. The frame has a twist off pot and burner assembly. It has been cleaned and it has a