WWII Era Mark V Divers Air Line Hose Republic Rubber

This is a length of vintage Mark V divers rubber air line hose. This line was made in 1979 and appears to be in good condition, but is being sold for display purposes only. The brass fittings are in g

Very nice vintage divers whip. This section of hose connected the Mark V helmet to the air control valve. This whip was made by Republic Rubber during August of 1966. Excellent example for display pur

Wonderful grouping of original air and communications line equipment. The lot consists of a Lunkenheimer triple manifold, six brass air line hose clamps and a communications line block clamp. Difficul

Excellent condition Mark V divers whip. This air supply house connects to the air fitting on a Mark V helmet and also to the air control valve. This whip was made by Republic Rubber during October 197

Equipment looks like it was taken right off helmet after a job. Items include a vintage Mark V air control valve with no manufacturers name, a whip made by Republic Rubber in 1964 and lastly a 54 inch

Original used Republic Rubber Co whip. This 3-foot-long rubber hose with female connections went from the helmet to the air control valve. Good example for display purposes only. Dated 1958. All items

Original Swan Rubber Company Divers H.P. or whip. This section of hose attached to the non-return valve on the Mark V and then to the air control valve. Hose is in excellent condition and dated Septem

Nice original air control valve made by Schrader. This is the type of valve used with the Mark V diving helmet. This piece does have the Schrader name stamped on it as well as a US Navy inspection sta

A classic piece of underwater diving equipment! This is a WWII era Morse Diving Equipment electric lamp or light. These impressive lamps would produce an impressive for the time amount of light underw

This is a World War 2 era Mark V divers non-return valve. This part was made by Schrader and is stamped with their name and USA. The valve is in original condition and is a period correct component fo

This is a World War 2 era Mark V divers exhaust valve. This part was made by BTE, aka Batteryless Telephone & Equipment Co. These are the primary type of exhaust valve found on World War 2 Mark V helm

This is an authentic World War 2 era US Navy Mark V divers knife. This example was made by the Bomar Corporation located in Pittsburg, PA. Examples of the Mark V knife made by Bomar are very difficult

This is an authentic World War 2 era US Navy Mark V divers knife. This example was made by the Bomar Corporation located in Pittsburg, PA. Examples of the Mark V knife made by Bomar are very difficult

This is a great opportunity to purchase one of the most difficult to find WW2 era US Navy dive knives! This is an authentic US Navy Standard Divers knife, aka the Mark V knife, made by the Bomar Corpo

This is an authentic and extremely nice World War 2 dated Mark V divers dress or suit. United States Rubber Co. made this one in August of 1944. This is a size three dress with nearly new looking canv

This is an authentic World War 2 dated Mark V divers dress or suit. United States Rubber Co. made this one in August of 1944. This is a size three dress with very bright, cleaned canvas. This dress ha

This is an authentic and very nice World War 2 dated Mark V divers dress or suit. This one was made by United States Rubber Co in March of 1945. This suit was preserved for decades in a bag, keeping t

This is the classic USN Mark V diving suit or dress. This example was made way back in June of 1945 and is still in presentable condition! The dress was made by the Hodgman Rubber Company and is a siz

This is a Thompson Engineering Company (TECO) shallow water diving helmet. This helmet or rubber mask utilizes twin air hoses that hook to a TECO union. Masks like this were used for shallow water div

Nice example of a air control valve. This piece of equipment was used in conjunction with the US Navy Mark V diving helmet. The air control valve was attached to the whip, which attached to the air fi

This lot is made up of a vintage World War 2 divers dress and a grouping of divers boot parts. The dive suit was made by United States Rubber Company during August of 1944. The canvas and rubber suit

Excellent grouping of WWII USN Mark V related diving equipment. The first piece is a Morse Diving Equipment Air Control valve. There is a small section of hose still attached as well as a brass swivel

This is a great looking and difficult to find Converse Rubber Company divers dress or suit. The suit is punched for a 12 bolt helmet, likely a Mark V. Converse used subtle blue, red, and white lines a

The famed US Navy Mark V diving helmet is known worldwide by divers and collectors alike. A vast majority of Mark V helmets that are found date to the World War 2 time period and also the very end of