The serial number is 1649077. Overall, the camera is functional as-is, but it would benefit from a CLA. The shutter works and sounds accurate on the fast speeds (1/30~1/500), but the slower speeds (1~1/15) seem too slow, and sometimes stick. The shutter release seems to stay stuck in after it is depressed, and does not pop back up again until the advance lever is cranked. This being the case, the bulb mode sticks open. The taking lens looks very clean, with only a bit of dust. The viewing lens seems to have a few minor aberrations along the outside of the lens, but these do not affect viewing. The aperture on the taking lens works properly. The focusing screen is fairly clean with no major scratches, and no cracks. Focusing is smooth. The light meter turns on and responds to light, but has not been tested for accuracy. The casing on the meter is cracked. The film advance crank feels a little stiff. A lens hood, a lens cap, three close-up filters, a flash, and an ever-ready case are included with the camera (all are Rollei brand). The case has a rip in the leather. In-House Shipping is Available. Please See our Website Regarding In-House Shipping Procedures.