Hans J. Wegner Three nesting tables. Produced by And

Hans J. Wegner (Danish, 1914-2007). AT-40 nesting table set. Teak, c. 1960. Produced by Andreas Tuck. Tallest: Height: 18 3/4", Length: 20 1/2", Depth: 13 1/4". Set of three teak nesting tables design

Hans J. Wegner Andreas Tuck Set of 3 nesting tables, model AT 40. Designed in the 1950s. Teak wood. Dimensions of the largest table: 48 x 52 x 34 cm. Marked with 'Andreas Tuck' brand mark.

Three oak nesting tables designed by Hans Wegner for Andreas Tuck, c. 1960's. Dimensions: H 19" x W 20" x D 13.5" Condition: Marking to top of wood finish. Wear consistent with age and use. WPA068

Hans J. Wegner Dining table, model no. AT-303, ca. 1960 Teak, beech, brass. Produced by Andreas Tuck, Denmark. Underside with producer's brand. 28.5" H x 63" W x 32" D

Danish Mid-Century Modern Hans Wegner for Andreas Tuck teak coffee table, having a circular top, above three tapered legs, underside marked: "Fabrikat: Andr Tuck, Arkitekt: Hans J. Wegner, Denmark, 20

Hans Wegner for Andreas Tuck double drop-leaf desk with three drawers. Marked 'Fabrikat Andr. Tuck / Arkitekt Hans J Wegner Denmark. Along with two tier table, model AT 305, unmarked. Measures 53 1/2"

With A Drylund Lounge Chair (29" h x 31" w x27" d). From a West 72nd St NYC estate. - Dimensions: Largest Nesting Table 19" h x 20"x 13.5"

Hans J. Wegner dining table Johannes HansenDenmark, c. 1960teak, stained oak, brass77 w x 41.5 d x 28 h in (196 x 105 x 71 cm) Signed with branded manufacturer's mark to underside: [Johanne

Hans J. Wegner Dining Table, model AT 314, Andreas Tuck, Denmark, 1960. Teak, brass. Closed - 72w x 41. 75d x 28h, Open - 119w x 41 3/4d x 28h. Provenance: George and Elizabeth Wile collection.

Hans J. Wegner Coffee table, model GE 453 GetamaDenmark, c. 1965stainless steel, oak, Formica, wenge 13 h x 25.5 dia in (33 x 65 cm) Provenance: Wyeth, New York | Privat

Hans J. Wegner Coffee table, model AT 308 Andreas TuckDenmark, c. 1955teak, oak, brass 21.5 h × 39.25 w × 23.5 d in (55 × 100 × 60 cm) Branded manufacturer's mark

Hans J. Wegner, Occasional table 'AT 35', 1945, H. 50 cm,Ø 71.5 cm. Made by Andreas Tuck, Copenhagen. Teakwood. Marked: manufacturer's branding., Exh. cat. WEGNER just one good chair, Copenhage

Designed by Hans J. Wegner and made in Denmark by Andreas Tuck Furniture Makers. Table features two 19.5 inch leaves. Table measures 94 inches when fully extended. Model AT312 Andreas Tuck Denmark, C.

Hans J. Wegner Sewing table, model AT 33 Andreas TuckDenmark, c. 1956teak, cane 24 h × 26.25 w × 22.5 d in (61 × 67 × 57 cm) Sold with two 10.5-inch leaves; table

Hans J. Wegner coffee table, model AT12 Andreas TuckDenmark, 1950 / 1955teak, matte chrome-plated steel29.5 w × 29.5 d × 15 h in (75 × 75 × 38 cm) Signed with partia

DESCRIPTION: Hans J Wegner, Andreas Tuck, (Sewing Table AT-33) features a teak wood and oak table with rectangular top and drop-leaf sides over a single drawer atop a pull-out inset basket. Marked at

Ca. last half 20thC. Very good condition with no breaks or repairs. Six Wishbone CH24 dining chairs designed by Hans J. Wegner and produced by Carl Hansen & Son, ready to use. These chairs feature a p

Ca. last half 20thC. Six Wishbone CH24 dining chairs designed by Hans J. Wegner and produced by Carl Hansen & Son, ready to use. These chairs feature a pre-1980s makers mark, see photos. Very good con

20 1/2" X 13 1/4" X 18 1/2"--SET OF TEAK NESTING TABLES

Hans J. Wegner Drop-leaf dining table, model AT 304 Andreas TuckDenmark, c. 1960teak, brass 28.25 h x 50.5 w x 33.625 d in (72 x 128 x 85 cm) Branded manufacturer's mark to underside 'Fa

Hans J. Wegner (1914-2007) Dining Table, model AT321 Andreas Tuck, Denmark rosewood, chrome-plated steel with manufacturer's branded mark H 28 1/2 x W 63 x D 51 1/4 inches, closed Property from the Ph

Hans J. Wegner (1914-2007) for Carl Hansen & Son dining table and chairs, set of six Oddense, Denmark, 1960s oak, teak branded marks table with two pull-out leaves table: 55"w x 36"d x 29 1/2"h, chair

Hans Wegner Folding tray table, model no. AT-35, ca. 1960 Teak, oak. Manufactured by Andreas Tuck, Denmark. Underside impressed with manufacturer and designer information. 19" H x 24" W x 24" D

Hans J. Wegner (1914-2007) for Carl Hansen & Søn folding tray table, #CH417 Denmark, 1960s wenge, oak, laminate, steel unmarked 24 1/2"dia x 13"h