Antique Spanner Wrench For Helmet Breastplace Wing Nuts

Cast brass spanner wrench commonly used on the Mark V diving helmet breastplate wing nuts. This wrench gives the user greater leverage in turning wing nuts over the standard Tee wrench. Wrench is in e

This is an antique T wrench compatible for use on most American made diving helmets from the 19th and 20th centuries. This example has a great visual appearance. There is a hole through both sides, li

FOUR ANTIQUE ADJUSTABLE WRENCHES: 1883 Antique Diamond Adjustable Wing Nut Wrench  Steel Fo

Nice original tee wrench for use on US Navy Mark V diving helmets wing nuts. Unlike most tee wrenches, this one is clearly stamped DESCO on the handle. Old yellow cord also wrapped on the wrenches han

Cast brass Tee used on the Mark V diving helmet breastplate wing nuts. This was the standard tool used to remove and install the Mark V diving helmet wing nuts. Great piece to have on display next to

This lot consists of a US Navy Mark V diving helmet T wrench and air fitting cap. The wrench is used for the removal and installation of the 12 wing nuts on the outside of the breastplate. This exampl

This is a vintage US Navy Mark V diving helmet tee wrench. This tool is used to secure and remove the wing nuts on the Mark V helmet. Good original used condition, made of brass. All items will be shi

This is an original grouping of Mark V parts. The items include a complete set of wingnuts, T wrench, and a set of four copper shims. All of these parts are common components missing on Mark V helmets

This is a very nice grouping of vintage DESCO divers tools. The first is a brass T wrench used on the wing nuts of a Mark V helmet. Next is a matching pair of DESCO stamped cuff rings complete with br

Set of four unused US diving helmet breastplate studs and matching wing nuts. Studs are 2.25 inches long, so they are the standard short type. These were used on numerous types of US made diving helme

Complete set of twelve diving helmet wing nuts. These are made of brass and do thread onto Yokohama helmets. Appear to be contemporary, some of the threaded holes are not perfectly center. All items w

Grouping of seven brass diving helmet wing nuts. We are not sure of the specific model of helmet these would be used on, but possibly on Japanese, Chinese or Korean helmets. All are in good condition,

Three Contemporary Carved Wood Models of Carpenters Tools, consisting of hammer, wrench and wing nut Hammer Length 13.5 in. Provenance: The Estate of Stephen Weinroth, Nantucket, Massachusetts

DESCRIPTION: Antique Chinese bronze helmet featuring parcel gilt sculptural wings at the sides and two dragons meeting at the top, further etched dragon depictions throughout, completed with a finial.

A restored pancake fan with the sought after fluted base. Has the original cage, blade, wing nuts, glider, I.D. tag. The cord and plug has been replaced along with knob on back. Fan did run before res

This is a complete set of four lead weights for a Miller Dunn Divinhood Style 1 or 2. Both models of helmets utilized a copper strip that allowed the weights to be hooked to them via a copper tab on t

A adult-scale brass diving helmet and collar replica, bright 2-tone brass with wing nut closure (JRUB8002/2) {TC} Measurements: 19" H overall

Antique brass and pewter kaleidoscope on a steel, brass and circular base, lacking one wing nut at stand, operates, 9.75"h, 10.75"w, 6.25"d, 2.5lbs Start Price: $60.00

Antique, hinged bronze ship's porthole with glass and wing nut locks. Window hole measures 9" diameter. Total diameter measures 11".In-house International shipping NOT available for this item. UPS thi

Unmarked. Adjustable wing nut, locking. 5 1/4" high x 3" diameter. MEG IMPORTANT: Before bidding, please read the terms and conditions. When you registered for the auction you agreed to these terms an

3pc Lot screw adj. spoke wr. 1pc Wald-3 3/4", 2pc Pat. 1921 with large brass wing nut-3"

DESCRIPTION: Antique powder paper folder, nickel plated brass with wing nut adjustment. Unmarked. 19th century. MEASUREMENTS: Base 3" diameter, 5-1/4" high fully extended. CONDITION: Some losses to ni

OMNI By GEORGE NELSON Shelf Unit Parts. Includes 36 unused shelf brackets. 3 Omni system lamps and 6 cord anchors. 37 unused system mounting blocks. 1 original Omni nut wrench. Most pieces in original

Antique 19th C Carnelian Intaglio Pendant w Dog Clip Greco Roman style intaglio of Hermes wearing his helmet with wings. Measures 2 inches in length.