Morse Diving Equipment Model 15 Diver Air Pump Polished

This is a very nice original Morse Diving Equipment Model 15 air pump. This is the same put that would accompany the Model 15 shallow water diving helmet. The original two piece cast iron handle and b

This is the desirable Morse Diving Equipment number 3A divers air pump. This model is considerably smaller than others, making it ideal for display in a home or office. The pump retains its original w

One of the most unique and sought after pieces of diving equipment is the larger and impressive air pumps. These pumps are commanding in presence and true pieces of mechanical, industrial, and diving

WWII era Morse Diving Equipment model 15 shallow water diving pump, serial 6902 with USN inspection stamp. Measures 21 inches wide, 29.5 inches tall with the handle. Should have a 2nd section of handl

This divers air pump was made by arguably the most famous American diving equipment maker, the A.J. Morse & Son Company. Located in Boston, Massachusetts, this company would start making diving helmet

Circa WWII solid brass air hose oil separator clearly stamped Morse Diving Equipment Co. Inc. Boston Mass. USA with 210 and 211 stamped into either side of the housing. The brass housing is in very, v

These are the front and back lead weights for an AJ Morse or Morse Diving Equipment Model 15 shallow water diving helmet. These weights are contemporary. The pair weigh 34 pounds in total. Unused in l

Grouping of three contemporary brass plaques. The first is a USN Standard Diving Air Pump Mark III Morse Diving Equipment Plaque, brass, measures 8-7/8” wide by 4-5/8” tall, weighing 1 pound 7 oun

Featured here is one of the most unique shallow water diving helmets ever made! This is a Model 15 helmet made by Morse Diving Equipment in Boston, MA. This was the only shallow water helmet Morse off

Featured here is one of the most unique shallow water diving helmets ever made! This is a Model 15 helmet made by Morse Diving Equipment in Boston, MA. This was the only shallow water helmet Morse off

An assortment of 14 various brass divers air hose fittings. Two of the double male fittings are stamped Morse Diving Equipment and a third is stamped DESCO. All items will be shipped with a signature

Original divers air pump compressor gauges are works of industrial art in themselves. The challenge is finding a way to display them. Long ago, a clever diver with spare diving equipment parts made th

Like new with original cardboard thread protectors is this Morse Diving Equipment air control valve. This piece of equipment was used with the US Navy Mark V diving helmet. It attached to the bastard

Excellent new old stock air control valve made by Morse Diving Equipment in Boston. Valve is clearly stamped with company information. This valve is the type used in conjunction with the Mark V diving

This is great looking single divers boot! It was made by the Morse Diving Equipment Company in February of 1951. This information is stamped into the wood inner sole. The boot weighs 19 pounds. The bo

This is a seldom seen divers transceiver or radio made by Morse Diving Equipment. The wood case measures 13.25 inches wide, nearly 9 inches tall and 6.5 inches deep. It weighs 11 pounds. The wood case

Excellent grouping of WWII USN Mark V related diving equipment. The first piece is a Morse Diving Equipment Air Control valve. There is a small section of hose still attached as well as a brass swivel

This is an original grouping of used diving equipment parts. The parts include an air control valve with a US Navy inspection stamp, an air hose filter housing stamped Morse Diving Equipment, air hose

In like new condition is this vintage Morse divers air pump plaque. Made of brass, this specific plaque would have been mounted on the top inside edge of a 2-diver air pump. The operator could move a

Vintage non-return valve made by the Morse Diving Equipment Company in Boston. Same style used on Mark V helmets as well as commercial hats. Nice original condition. All items will be shipped with a s

This is a very nice and likely never used divers boots. These were made by Morse Diving Equipment and are stamped on the inside wood sole. These boots feature a corrugated brass bottom and brass toe,

This is a vintage Morse Diving Equipment Mark V divers underwater lamp or light. This configuration is different from the more commonly found round lights. This example is clearly marked Morse Diving

Featured is an early style model 1 Miller Dunn divers air pump. This type of pump was sold with the famed Miller Dunn Divinhood shallow water helmets. Also included is a vintage handle for the pump. T

Newly cast pair of front and back lead weights for the Morse model 15 shallow water diving helmet. These weights are the correct size, weight and do have Front and Back clearly part of their design, j