2 DAYTON STEEL FIRE TRUCKS

painted pressed steel, Ladder Truck, 20 in long, Ladder Truck w/Tank, 24 in long, both are incom, C4-5.

This lot of 2 includes 1 - Buddy L fire truck in as-found condition with 2 ladders, has scratches and paint wear, and 1 - additional truck with two ladders missing, steering wheel, and original decal

Cadet Aerial Ladder no. 940 and Classic Aerial Hook-n-Ladder no. 885..Both unopened, dust and grit present, boxes with damage and loss, clouding and scratches to plastic windows

Toy Trucks (2), Steelcraft pressed steel fire engine & truck, Good+ cond w/later paint & missing elements, larger 22"L.

Early Dayton Hill Climber Fire Truck. All original with driver and ladders. Very nice paint. 17" Excellent

Turner toy steel fire truck, L 33-1/2" W 9" H 9".

1930's Keystone pressed steel wind-up aerial ladder truck, sold with an unmarked pressed steel ladder truck with wooden wheels, both in shiny condition, lengths 24", 21 1/2"

A group of three pressed steel and plastic fire trucks. A Texaco Fire Chief missing side ladder and top plastic pieces. A Nylint Aerial Hook-N-Ladder No. 2 missing the extension ladder and part of the

Pressed steel fire truck. H 11" L 32-1/2" D 7"

Mack truck. Wear and chipping to paint. 36-1/2” long x 6” wide. IMPORTANT: Before bidding, please read the terms and conditions. When you registered for the auction you agreed to these terms and w

Vintage Buddy "L" Pressed Steel Fire Truck, two piece tractor and extension ladder trailer with two side ladders, hard rubber wheels, 28 1/2" combined length, decals on both sides of trailer. CONDITIO

No markings. Measures 6 1/2" x 17". Estimate $100 - $200. Starting bid $20.

Triang pressed steel fire truck and a working windup mechanized transport tow truck. Both made in Great Britain, circa 1960. Dimensions are: largest 12 1/2" long. All measurements are approximate.

STRUCTO PRESSED STEEL FIRE TRUCK Dimensions: 18" X 5 1/2"

Dayton pressed steel fire pumper with painted tin driver, 13 1/2'' l.

Two Vintage 1950's Tonka TFD Pressed Steel Red Fire Trucks. 1) 1958 Hydraulic No. 5 Fire Engine Fire Truck 32" long x 6-1/2" x 6-1/2" high. 2) No. 5 Pressed Steel Fire Fighting Water Pumper Truck. 17"

1920s. American. Painted pressed steel. Mechanically functioning but mechanism for raising the ladder needs adjustments. Kingsbury Motor Driven decals in rear and underneath truck. 5 x 14 1/2 x 4 1/4"

in original red & green painted finish with chromed ladder and bell, black rubber tires marked "Turner Toys", 5 1/2 x 29 x 6" high.

in original red painted finish with chromed bell and teo detachable ladders, turned wood wheels, 6 x 24 x 67 1/2" high.

Ca 1960 Marx pressed steel ride-on ladder truck fire truck, excellent condition, front mounted early plastic horn & lights, length 30 1/2" (largest size)

painted pressed steel, Dayton Dump Truck, 19 1/2 in long, missing tailgate, friction working erratically, Turner Pick Up, 23 in long, C4-5.

Made in USA by Marx. Pressed Steel Fire Patrol Truck w/ Electric Lights, Sirens, Water Tower, 2 Removable Ladders & Dummy Hose. Comes w/ Added Firemen & Fire Extinguishers. Front Wheels Adjust to Run

Includes Buddy L Texaco tanker truck and Structo SFD fire truck. Both with overall surface wear as expected with age including corrosion. IMPORTANT: Before bidding, please read the terms and condition

Circa 1920's. Older restoration. Missing its crane, boom, hose, and proper ladders. Candidate for re-restoration. Condition (Restored). Size 25 - 1/2" L.