Airgenate Airtap Model A7 Water Pump Heater

No shipping !

A lot consisting of a model water pump, candlesticks and a crucifix.

early 20th c patent model-type scale version of a coal or wood fired stove hot water heater with a hot water tank attached to the side of the stove, ht 10"

Water Pump model WP30XY connection Dia 3" 264 gal/min

A vintage model wind mill / water pump, possibly Empire, measuring 21 inches high x 7 x 8. As shown.  Items are sold as is. Please inquire about condition if not otherwise stated.

WWII era Morse Diving Equipment model 15 shallow water diving pump, serial 6902 with USN inspection stamp. Measures 21 inches wide, 29.5 inches tall with the handle. Should have a 2nd section of handl

This is a nice original Miller Dunn model 1A shallow water air pump. This example retains the original handle with wood end. The pump frame is cast iron. Both cylinders are clearly marked Miller Dunn

This is a very nice original Morse Diving Equipment Model 15 air pump. This is the same put that would accompany the Model 15 shallow water diving helmet. The original two piece cast iron handle and b

While Miller Dunn pumps generally are not particularly rare, an early model No 1 made of brass is. A vast majority of Miller Dunn shallow water pumps surviving are model 1A. According to the book The

This is a classic Miller Dunn model 1a shallow water diving air pump. This style of pump was used with all three models of Miller Dunn helmets. The pump does come with a custom handle. Accompanying th

Locomotive Feed Water Heater and Pump. No. 4 1/2 BL. B.260084. Pat. Dec. 22, 1925. Very nice piece! Mounted on an oak board. Came out of Duluth, Missabe, and Iron Range Proctor, Minnesota Depot.

While Miller Dunn pumps are generally not rare, an early model No 1 made of brass is. A vast majority of Miller Dunn shallow water pumps surviving are model 1A. According to the book The Divinhood by

ATTRIBUTED ENGLISH STUART TURNER MODELS MIXED METALS STATIONARY VERTICAL V10 MODEL STEAM ENGINE AND FEED WATER PUMP,cast-iron, steel, and brass, base fitted with two tabs for securing base and some po

Working Model of a Steam Engine with Water Pump, c. 1980 Based on an English machine from the 19th century, approx. 1-inch scale, cast metal, steel and brass, wood-planked double-acting cylinder, Ø

Takagi 140,000 BTU Tankless Water Heater Natural Gas/Propane Outdoor Model T-KJR2-IN. I have the same and love it.

Model 2E-38N

A French antique limestone fountain, hand-carved limestone basin with its water pump in iron hand finished. Original, signed "Pompe Corneau" from France. 19th century. Model "Deville", from Lorraine,

Working Model of a Traction Engine with Dynamo, c. 1980 Probably England, single-cylinder steam engine, for spirit heating, fusee-and-chain steering, feed pump, steam whistle, water level glass, manom

BING drive models, pumping station, 22.5 cm, water mill with mountain scenery and miller, with pump, surface area 22 x 23 cm, restored, 2 wells with pumping station, small saw, mostly restored German

MäRKLIN steam engine model, with dynamo and feed pump, lying boiler, surface area 35x34 cm, burner, water level glass, manometer, pipe, regulator of centrifugal force, funnel, boiler diameter: 8 cm,

Featured is an early style model 1 Miller Dunn divers air pump. This type of pump was sold with the famed Miller Dunn Divinhood shallow water helmets. Also included is a vintage handle for the pump. T

Cement composite, signed inside 1986 Henri Studios Inc. Palatine, Model 6668. Height 38", Dia 23" diameter. Two pieces. Pump has not been tested. Includes splash guards with some fractures.

A French Village (countryside) antique fountain with its antique water-pump in iron, 19th Century. Originally used to provide water to the horses in the village. Beautiful flowers design on the iron o

A French Village (countryside) antique fountain with its antique water-pump in iron, 19th Century. Originally used to provide water to the horses in the village. From Provence area, Riviera Coast in t