Bertoia Slat Bench for Knoll

Harry Bertoia slat bench Knoll InternationalUSA, 1952 / c. 1965ash, enameled steel15.5 h × 66 w × 18.25 d in (39 × 168 × 46 cm) Literature: Knoll

Dimensions: H 16” x W 60” x D 15.5” Condition: Some surface wear. Few pieces slightly loose, does not seem to affect sturdiness.

Harry Bertoia (1915-1978) Slat Bench Knoll International, USA lacquered ash, enameled steel with partial manufacturer's label H 15 1/2 x W 54 x D 18 1/4 inches This lot is located in Chicago. Property

Harry Bertoia (Italian/American, 1915-1978) Slat Bench for Knoll International, Ebonized Wood and Chrome, 15-1/2" H, 72" W, 18-1/2" D. Slats have scratches consistent with age & use; (2) heavier scrat

Harry Bertoia (Italian/American, 1915-1978) Slat Bench for Knoll International, Ebonized Wood and Chrome, 15-1/2" H, 72" W, 18-1/2" D, There is light pitting on the metal legs. Also, some light scratc

Bertoia for Knoll Slat Bench. 1952. Stained Black. 18.5" x 72 " x 15.5"

Harry Bertoia - Knoll Slat Bench. Dimensions 15.5x82x18.5

Harry Bertoia (1915-1978) for Knoll Associates slat bench New York, New York, 1952 lacquered ash, enameled steel Knoll sticker label 82"w x 18"d x 15 1/2"h

Enamel Steel Legs. From a Westport, CT estate. - Dimensions: 72" w x 18.75" d x 15.5" h.

Description - Harry Bertoia for Knoll slat bench. Dimensions - 15" x 72" x 18"

The Signed Knoll Bench does have some Nicks, a few Scratches, and a Small Divot to the Ebony-Colored Wood, but it is in Overall Good Condition. The Chrome Portions look Flawless. The Bench measures 15

Circa 1970s, oak slatted seat on enameled steel frame, with Knoll label on underside h. 15-1/2 w. 66 d. 18 in. Provenance: Private collector, Pound Ridge, NY Harry Bertoia (Italian-American, 1915-1978

A Harry Bertoia for Knoll slat bench. Signed on leg. Dimensions : 15 x 72 x 15.5. All measurements are in inches. Height x Width x Depth

Harry Bertoia Y Base Slat Bench Table. Black iron rod base, long wood slat coffee table. Knoll International Label.-- Dimensions: H: 15.25 inches: W: 82 inches: D: 18.25 inches ---

Slat bench, New York, 1970s; Enameled steel, oak; Unmarked; 16" x 66" x 18 1/4"

Harry Bertoia, Italy (1915-1978). Bench designed by Harry Bertoia for Knoll has teak slats and black iron legs, circa 1960's. Measures 15.5"H x 18.25"W x 66"L. Condition report: good condition, see ph

Harry Bertoia, Bench '400', 1951, H. 38.5 x 167.5 x 46.5 cm. Made by Knoll International, New York. Metal rods, painted black, wooden slats., Rouland, Knoll Furniture 1938-1960, Atglen 1999, p. 112; K

Harry Bertoia, Bench '400', 1951, H. 48 x 183 x 47 cm. Made by Knoll International, New York. Wooden slats, painted black, chrome-plated metal rods, cushions with red textile covering., Rouland, Knoll

Harry Bertoia, '400Y' bench, 1951, H. 38.5 x 182.5 x 47 cm. Made by Knoll International, New York. Metal rods, chrome-plated, wooden slats, painted black., Rouland, Knoll Furniture 1938-1960, Atglen 1

In the manner of Harry Bertoia Slat bench c. 1990lacquered wood, chrome-plated steel 15.25 h x 72 w x 19 d in (39 x 183 x 48 cm) This work will ship from Chicago, Illinois.

Description - Slat bench, in the manor of Harry Bertoia. Dimensions - 16" x 72" x 19"

Vintage bench slatted in the manner of a Harry Bertoia Knoll bench. Heavy black metal base. Apparently unmarked. Dimensions: H 18" x W 62.75" x D 15.5" Condition: Very minor surface wear.

A wonderful and handsome Harry Bertoia bench or coffee table for Knoll Made of solid walnut and iron15.5\"H 82\"L 18.25\" D

A labeled Knoll slat seat bench supported on wrought iron base circa 1960. Ht: 15" Width: 60" Depth: 15"