DALLAIRE BULLET TETHER CAR WITH ANDERSON SPITFIRE

31. MASSIVE DON EDMUNDS BB KORN TETHER CAR | Built by the late Don Edmonds, a renowned tether car builder, in the early 1970s from the original molds of the BB Korn tether car produced in the late 193

rated 8, 18"L., the cast aluminum body is in good condition, the rubber tires are in poor condition, has no engine.

To be offered on Saturday, 24 September 2022

Blue car #1 original Australian king car with a McCoy .60 black case ignition engine. Condition: (Excellent). Dimensions: 19" x 8 - 1/2" x 6".

#5 McCoy invader car, with a carved wood top by Stanley Betz and .60 race motor. Condition: (Excellent). Dimensions: 20" x 6 - 1/2" x 5 - 3/4".

Silver and red #11 Bantam Midget, custom built by Ferral Byrd with bunch speed race motor. Condition: (Excellent). Dimensions: 20" x 8 - 3/4" x 7 - 1/2".

Car #42 custom built with a Dooling gear box, Hornet motor, builder unknown. Condition: Dimensions: 16 - 1/4" x 8" x 6".

Green car #3 built by John Moore, British racer hornet motor. Condition: (Excellent). Dimensions: 16 - 3/4" x 7" x 6 - 1/4".

Yellow and red #6 Gilmore Trackmaster, built by Autoresearch Don Edmunds and with a Bunch speed engine. 1 of 1 custom-built car. Condition: (Excellent). Dimensions: 18 - 3/4" x 8 - 3/4" x 6 - 3/4"

Car #27 Maroon as run 200 MPH world class car with a magnesium pan picco race engine. Condition: (Excellent). Dimensions: 31" x 2 - 3/4" x 5 - 3/4".

Original paint. Has engine, battery and other parts. Condition: (Excellent). Dimensions: 17" x 8" x 5 - 1/2".

Custom-built recreation orange #54 Elton Winchell race car with a rare talisman .60 race engine. Condition: (Excellent). Dimensions: 19" x 9" x 7".

Red custom-built car #45 Bantam midget with a sypercyclone speed engine. Condition: (Excellent). Dimensions: 19" x 9" x 7".

The circa 1946 car cast in one piece die-cast magnesium body without frame is powered by a Yellow Jacket YJ-61C motor, knee action front end suspension, ball bearing axles. Measures 6.5 x 16.5 x 8.25

(A) Mite car with a Dooling 29 race engine. (B) DP special race car with a hornet race motor and original Voit wheels and tires. Both are custom built by Jay Sowers. Condition: (Excellent). Dimensions

This first Dooling Brothers tether car came as a frame, body, bonnet differential, grill, wheels with Dooling Bros tires, etcetera to be assembled by the buyer. OK Super 60 gas engine. Measures 8 x 19

Car #2, yellow and black custom-built car with a Dennymite race engine. Condition: (Excellent). Dimensions: 17" x 8" x 7 - 1/4".

Car #7 Green custom-built bunch car with a supercyclone race engine. Condition: (Excellent). Dimensions: 20 - 3/4" x 8" x 7 - 1/2".

1451. HILLER COMET GAS POWERED TETHER CAR | 18.5" l. | Motor stamped 1080, paint is original in (Very Good Condition) | $500 - $1,000

The polished aluminum body on frame with original period Super Cyclone Engine sits on Dooling wheels and tires. Set up as raced. Measures 7.5 x 19 x 9.25 inches. Without proof of exemption, be aware t

1482. HILLER COMET GAS POWERED TETHER CAR | 18.5" l. | Wear to inside of frame, motor stamped X8C8, (Excellent to Pristine Condition) | $800 - $1,600

1941 - 1942. These cars were raced individually while tethered to a central pivot, or against each other on a scaled-down board track. This is one of approximately 500 models produced by Hiller Indust

with no markings; Condition: unknown motor; 19 inches wide; 8 1/2 inches deep; 6 inches high

Made in Argentina. Marked "Argentina" on black rubber tires. Nice decals of Maserati. Opening engine lid to see engine, which is marked "Nutley Tool & Machines". Has Italian flag colors on rear of car