Erie & Erie Lackawanna Brass Keys personalized

2 keys related to the Erie Railroad. (1) small Erie Diamond logo on one side and Adlake straight line hallmark on reverse - what's neat is a name has been scratched, probably with a nail so this was p

This is a set of four different Erie and Erie Lackawanna Railroad brass keys. Key one is stamped ELRR on the front and ADLAKE on the back. The second key is stamped on the back with the Erie RR Diamon

This is a lot of four brass keys from the Erie RR and Erie Lackawanna RR. Three of the keys are from the Erie; two have the same cut, but all three keys are different. The first is stamped ERIE and CT

This is a pair of railroad switch locks and keys. The first is an Erie Lackawanna Railroad lock made by Slaymaker and is unmarked. It opens easily with the brass Adlake EL key, and the key cover sprin

This is a pair of Bessemer and Lake Erie brass keys. The first is stamped straight across the top with B&LERR. It has a slightly tapered barrel, and is numbered 8519 on the back. The second key is sta

Pair of Slaymaker Pittsburgh & Lake Erie Railroad Brass Keys - Serif Font Pair of P&LE keys both stamped P&LE in serif font on the front of the hilt. Both backsides marked with Slaymaker and D181 and

.

A brass lock and key made for the New York & Erie Railroad. This is an early Erie name. This is one of the over-sized locks that is quite heavy. No maker and large initials stamped on the drop. It has

A nice earlier key with "NYLE&W RR" stamped on one side and the Bohannan, Brooklyn hallmark with an "S" on the reverse. This is the single ring larger style Bohannan design. The Erie used this name fo

Erie Railroad Brass Oiler Key Key is stamped ERIE on the front with no reverse markings. Key measures 1 3/4" tall.

This is a standard style Adlake key and it has "ERIE" spelled out in block lettering. It has the ADLAKE logo on the other side. It does not have an "S" but this is the Erie switch bit. Moderate use.

An Erie brass lock with ERR stamped on the face. It has 2 keys, one marked ERR "G Master 3A95999". The other key has an ornate Corbin, New Britain hallmark. The clevis on the lock is crushed on the si

This is a pair of brass railroad keys. The first is a rare key from the New York Lake Erie and Western Railroad, stamped N.Y.L.E.&W. R.R. on the front. It is an S key and has the faint remains of the

A lock & key pair from the Erie Railroad. The lock has a nice brass dust cover with ERIE RR casting. The lock has the Fraim "keystone" hallmark stamped on the shackle. The key has ERIE stamped on one

Erie Railroad Double Hilt Brass Key w/ Serif Font Key is stamped Erie RR in serif font on the double hilted key. Ringed taper at the top of the barrel below the hilt. Key measures 3 1/2" tall and has

This is a pair of Erie Railroad switch locks with brass keys. The first is a Fraim lock stamped ERIE, and comes with an Adlake key with the Erie diamond E logo stamped on it. The lock has a chain and

A larger than average switch style key marked E EX CO. Phil Simms originally thought this was Eastern (B&M predecessor) but scratched that out and put Erie instead. Some research at some point must ha

Single ring barrel stamped with W&LE RR on the front and W. Bohannan stamped on the reverse. The key has some mild pocket wear and the reverse stamping shows light wear.

This is a rare, hard-to-find brass switch key from the Lake Erie and Western Railroad, only present from 1879 to 1922. Stamped LE&WRR on the front, the reverse is stamped S, as well as the number 4805

This is a standard style Adlake key and it has the Erie "diamond logo" on one side at 12:00. It's bright. There is a matching lock elsewhere in this auction. This key strongly resembles the first key

This is a rare, hard-to-find brass key from the Lake Erie and Western Railroad. Stamped LE.&W.RR. on the front, it is numbered 577 on the back and is stamped as a C key. Also has the A&W CO CHICAGO ha

LOT (2) BRASS RAILROAD KEYS CNE&W & ERIE 19TH C.

Erie Railroad Brass Small Lock Erie Railroad Brass Small Lock. Cast with ERIE on the front of the lock body. No key or other makers marks. Measures 1 3/8" tall.

A pair of nice Erie Railroad brass Locks. They both have the Erie diamond logo. Also included is a Corbin key with ERR MASTER shop stamped.