Jack Henry 2 Carb High Rise Intake

Very hard to find early intake. Shows minor wear, some small nicks, and a small chip along the bottom edge. We have not tried to remove the fittings. Needs to be cleaned. No noted cracks or repairs. D

Marked MFG. By Electric & Carburetor Eng. Co Los Angeles. Also marked T4726. Shows paint loss and minor wear throughout. Has chip on one end. Dirty but will clean up nice. No noted cracks or repai

In very good overall condition. Shows minor wear throughout. No noted cracks or repairs. Someone marked it 5405. It displays very well. 7.5"x21 7.8"

Marked PM-7. Shows some wear throughout with some nicks and chips. Has a very old repair which can be seen from the top and bottom. Displays well. 7.5"x21.75"

The stack is marked Harrell. The intake is unmarked. It shows light wear throughout. No noted cracks or repairs. It displays very well and is a unique intake. 7 3/8"x21 7/8"

Was painted at one point. Marked F-7975. Shows wear and paint loss throughout. No noted cracks or repairs. Displays well and the carbs mount on an angle. 7.5"x21 7/8"

Shows some wear and paint loss throughout. Was painted at some point. No noted cracks or repairs. Displays well. 7.25"x21 5/8"

Nice overall condition. Shows light wear and some nicks throughout. No noted cracks or repairs. Displays well. 7 3/8"x21.5"

Marked 047M on the bottom. Very nice overall condition. Shows light wear and some nicks. No noted cracks or repairs. Displays well. 7 3/8"x21.75"

Shows some wear throughout. Dirty but will clean up nice. Has a couple chips on the front. No noted cracks or repairs. 7 3/8"x22 1/8"

Shows minor wear throughout. Marked ER2. Dirty but will clean up nice. No noted cracks or repairs. Displays well. 7.5"x21.25"

Shows light wear throughout. Dirty but will clean up nice. No noted cracks or repairs. Displays well. 7.5"x21 1/8"

Shows some wear throughout. Dirty but will clean up nice. No noted cracks or repairs. Displays well. 7.5"x21.25"

Shows light wear throughout. The collar around one hole has a small chip and there is a screw in it. No noted cracks or repairs. Displays well. 7.5"x21"

Shows some minor wear throughout. No noted cracks or repairs. Displays well. 7.25"x21 5/8"

Has not been drilled. Has Battersby wrote on it in marker. Possible recast. Shows very little wear and is rough cast. No noted cracks or repairs. Displays well. 7 3/8"x21 3/8"

Has Cragar wrote on it in marker. Shows sear throughout. Dirty but will clean up. No noted cracks or repairs. Displays well. 5.5"x12 1/8"

For model A & B. Shows some wear and scratching throughout. No noted cracks or repairs. Has Evans wrote on it in marker. Displays well. 5.5"x12 1/8"

Signed at back. 11" wide x 7" deep x 17-1/2" high. Henry Etienne Dumaige (French, March 30, 1830-March 31, 1888) studied sculpture under Jean Féuchère and Christophe Dumont. He exhibited his sculptu

An antique wrought iron wax jack, 5 1/2" high. Un distributeur à cire antique en fer forgé, avec poignée bouclée, 5 1/2" haut.

the wax jack with stem bent, plate wear, together with a Sheffield silver plate dish cross. Jack 5 1/2" high, 4 1/4" wide, cross 3 1/4" high, 12 1/2" wide. Provenance: Property of a NYC Estate.

Royal Doulton Porcelain Figurine HN3891 Sir Henry Doulton 9 1/2 high Shipping in continental US $18.00 If shipping is $0 then buyer arranges pick up or shipping. Please ask any questions before biddin

Three Early 20th Century Skyscraper Cast Iron Still Banks. Kenton high rise, 5-1/2"h., Hubley triangular bank building, 6"h., A.C. Williams skyscraper, 5-3/4"h. Condition: Good with wear, original pai

An easel back photograph frame with silver surround, hallmarked Birmingham 1903, maker Henry Matthews. Approx. 6 1/2" high x 4 1/2" wide overall